3Press 9k / n to select “On” or “Off” and then 9ENTER to confirm.
•If you select “On”, you do not have to set other network parameters. Refer to step 5 and finish the configuration.
•If you select “Off”, you need to set other network parameters. Refer to steps 4 through 6 to set the parameters.
Note
When “DHCP” is set to “On”, you cannot select and adjust any other network settings. To specify the other parameters, you need to first set “DHCP” to “Off”.
4Press 9k / n to select the desired parameter and then 9h.
5Press 9l / h repeatedly to select the digit to change and then press 9k / n repeatedly to change the number.
6Press 9ENTER to confirm the setting of the parameter.
7Repeat steps 4 through 6 to configure each network parameter.
8Press 9n repeatedly to select “Setup” and then 9ENTER to finish configuration.
Note
In case you have changed your network configuration, you may need to reconfigure the network settings again.
y
You can reset the network settings of this unit to the initial factory settings by using “NETWORK” of “INITIALIZE” in the advanced setup menu (see page 120).
■Information (Network information)
Use this feature to display the network system information.
MAC Address
Graphical user interface (GUI) menu
System (System ID)
This information displays the system ID that is assigned to this unit.
Manual Setup (Option)
This menu adjusts the optional system settings.
■Front Panel Disp.
(Front panel display setting)
Dimmer (Dimmer)
Use this feature to adjust the brightness of the front panel display. Control range: – 4 to 0
Dimmer | 0 |
Scroll
Scroll (Front panel display message scroll)
Use this feature to set whether to display the information (such as song title or channel name) in the front panel display in a continuous manner or by the first 14 alphanumeric characters after scrolling all characters once when “DOCK”, or “NET/USB” is selected as the input source.
Choice | Functions |
|
|
| |
Continue | Continuous mode. |
|
|
| |
| Select this to display the operation status in the front |
|
| ||
|
|
| |||
| panel display in a continuous manner. |
|
| ||
|
|
| Operation | Advanced | |
Once | |||||
|
| ||||
| Select this to display the operation status in the front |
|
| ||
| panel display by the first 14 alphanumeric characters |
|
| ||
| after scrolling all characters once. |
|
| ||
|
|
|
|
| |
■iPod (iPod settings)
Standby Charge
(iPod charge on the standby mode)
Use this feature to select whether this unit charges the battery of the
Configuration
00:00:00:00:00:00
stationed iPod or not when this unit is in the standby mode (see
Status
Information100BASE-TX
Full Duplex
System
ABCDE123
Note
The above display is an example.
MAC Address
(MAC (Media Access Control) address)
This information displays the MAC address that is assigned to this unit.
Status (Network status)
This information displays the current link status of the network. Display status:
Full Duplex, Half Duplex
Note
“No Link” appears when network connection is not made.
page 64).
Choice | Functions |
Auto | Charges the battery of the stationed iPod when this unit is |
| turned on and in the standby mode. |
|
|
Off | Charges the battery of the stationed iPod only when this |
| unit is turned on. |
|
|
■Audio Select
(Default audio input jack select)
Use this feature to designate the default audio input jack select setting (see page 81) for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.
Choice | Functions |
Auto | Automatically detects the type of audio input signals and |
| selects the appropriate audio input jack select setting. |
|
|
Last | Automatically selects the last audio input jack select |
| setting used for the connected input source. |
|
|
