
Remote control features
Simplified remote control
Use the supplied simplified remote control to make basic controls of this unit.
STANDBY
Sets the selected zone to the standby mode.
☞ P. 39
STANDBY
POWER
POWER
Turn on the power.
☞ P. 39
SYSTEM MEMORY
Save or recall the system settings. ☞ P. 96
| SYSTEM MEMORY |
| |
1 | 2 | 3 | 4 |
INPUT
INPUTl / h
Select the input source.
☞ P. 50
PRESET +/–
Recall the preset network/USB contents.
☞ P. 70
s(stop) / p(play) / b(skip backward) / a(skip forward)
Control playback of the iPod or Network/USB contents.
☞ P. 64, 67
INT SOURCE |
PRESET |
VOLUME |
MUTE |
VOLUME +/–
Adjust the volume level.
☞ P. 50
MUTE
Mutes the audio output.
☞ P. 52
Remove the insulation sheet before using the remote control.
Note
When you select “NET/USB” as the input source, this unit activates the last selected sub input source (see page 67).
■Setting the controlling zone of the simplified
remote control
Use this feature to set the controlling zone (see page 116) and remote control ID (see page 119) of the simplified remote control.
Setting the remote control ID
Press and hold b on the simplified remote control and then 1 or 2 for 3 seconds to select the desired remote control ID.
•ID1: Press and hold b and 1.
•ID2: Press and hold b and 2.
Setting the controlling zone
Press and hold a on the simplified remote control and then 1, 2, 3, or 4 to select the desired zone.
•Main zone: Press and hold a and then press 1.
•Zone 2: Press and hold a and 2.
•Zone 3: Press and hold a and 3.
•Zone 4: Press and hold a and 4.
■Replacing the battery in the simplified remote
control
Change the battery when the operation range of the simplified remote control decreases.
Use a straight | Replace the battery | Close the cover. |
pin to remove | with a new CR2025 |
|
the cover. | battery. |
|
Notes
•Insert the battery according to the polarity markings (+ and
•If the batteries run out, immediately remove them from the simplified remote control to prevent an explosion or acid leak.
•If a battery starts leaking, dispose of it immediately. Be careful not to let the leaking battery acid touch your skin or clothing.
•Before inserting new batteries, wipe the compartment clean.
•Dispose of batteries according to your regional regulations.