Yamaha DSP-Z11 Signal Info Input signal information, Language, 95 En, Notes, Operation, Advanced

Source (Source)

After selecting the input source, you can set the function of the TRIGGER OUT jacks when the corresponding input source is selected.

Choice	Descriptions
Input High	Sends the voltage when you select the input source
	you set in “Source”.
Input Low	Stops sending the voltage when you select the input
	source you set in “Source”.

Manual (Manual)

Choice	Function
High	Sends the voltage signals.
Low	Stops sending the voltage signals.

Signal Info.

(Input signal information)

You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

■Audio Info. (Audio information)

Format	Signal format. When this unit cannot detect a digital
	signal, it automatically switches to analog input.
Sampling	The number of samples per second taken from a
	continuous signal to make a discrete signal.
Channel	The number of source channels in the input signal
	(front/surround/LFE). For example, a multi-channel
	soundtrack with 3 front channels, 2 surround channels
	and LFE, is displayed as “3/2/0.1”.
Bitrate	The number of bits passing a given point per second.
Dialogue	The dialogue normalization level preset to the current
	input bitstream signal (see page 131).
Flag1/Flag2	Flag data encoded in the bitstream, or PCM signals that
	cue this unit to automatically switch decoders
	(“Surround EX”, etc.).

Notes

•“–––” appears when this unit cannot display the corresponding information.

•Some high definition audio bitstream contents may not include the discrete surround back left and right channel signals but are encoded at the bitrate of 192 kHz.

•Even if you make settings to output bitstreams directly, some players convert the Dolby TrueHD or Dolby Digital Plus bitstreams to the Dolby Digital bitstreams, while converting the DTS-HD Master Audio or DTS-HD High Resolution Audio bitstreams to the DTS bitstreams.

■Video Info. (Video information)

HDMI Signal	Type of the source video signals and the
	video signals output at the HDMI OUT jack
	on this unit.
HDMI Resolution	Resolution of the input signal (analog or
	HDMI) and the output signal (HDMI).
Analog Resolution	Resolution of the source video signals and
	the analog video signals output at the
	COMPONENT MONITOR OUT jacks of
	this unit.
HDMI Error	Error message for HDMI sources or
(HDMI Message)	connected HDMI devices. See page 124 for
	details.

	Graphical user interface (GUI) menu
HDMI error and message
Message	Cause
Device Over	The number of the connected HDMI components is
	over the limit.
	HDCP authentication failed.
Out of Resolution	The connected monitor is not compatible with the
	resolution of the input video signal.

Language

Use this feature to select the language of the menu items and messages.

Choices: English (English), (Japanese), Français (French), Deutsch (German), Español (Spanish), Русский (Russian)

y

You can also select the language using the “LANGUAGE” parameter in “Advanced setup” in the front panel display (see page 120).

Language	GUI menu	Front panel	Zone OSD
		display
Русский			—
(Russian)
(Japanese)		—	—
Other languages

··· The selected language is displayed.

—··· The selected language is not displayed. The menu items and messages are displayed in English.

Operation Advanced

95 En