RPR SBL SB SBR

DYPAO indicator

Lights up when you run “Auto Setup” and when the speaker settings set in “Auto Setup” are used without any modifications (see page 42).

EENHANCER indicator

Lights up when the Compressed Music Enhancer mode is selected (see page 59).

FPRE AMP indicator

Lights up when this unit is in the pre-amplifier mode (see page 120).

GSILENT CINEMA indicator

Lights up when headphones are connected and a sound field program is selected (see page 60).

HSLEEP indicator

Lights up while the sleep timer is on (see page 52).

IVOLUME level indicator

Indicates the current volume level.

y

When the audio output is muted, the VOLUME level indicator flashes (see page 50).

JInput channel and speaker indicators

Input channel indicators LFE

L

C R

FPR

SL

SR

Presence speaker indicators

RPR SBL SB SBR

Input channel indicators

Indicate the channel components of the current digital input signal.

Light up or flash according to the settings of the speakers when this unit is in the auto setup procedure (see page 42) or the speaker level setting procedure in the “Speaker Level” (see page 86).

Presence speaker indicators

Light up according to setting for “Front Presence” and “Rear Presence” (see page 84) in “Speaker Set” when this unit is in the auto setup procedure (see page 42) or the speaker level setting procedure in the “Speaker Level” (see page 86).

y

You can make settings for the presence and surround back speakers automatically by running “Auto Setup” (see page 42) or manually by adjusting settings for “Front Presence”, “Rear Presence” (see page 84), and “Surround Back” (see page 84) in “Speaker Set”.

KZONE2/ZONE3/ZONE4 indicators

Lights up when Zone 2, Zone 3, or Zone 4 is turned on (see page 111).

Connections

Preparation

41 En

Page 41
Image 41
Yamaha DSP-Z11 owner manual 41 En, Rpr Sbl Sb Sbr, Preparation