
Button | Moving direction of the GUI display |
|
|
9 k | Up |
|
|
9 n | Down |
|
|
9 h | Right |
|
|
9 l | Left |
|
|
■Wall Paper (Wall paper)
Use this feature to display the wall paper or gray background in your video monitor when there is no video signal being input.
Choice | Functions |
None | Does not display any background in your video monitor. |
|
|
Piano | Displays a background image (the photograph of a piano) |
| in your monitor when there is no video signal being |
| input. |
|
|
Horn | Displays a background image (the photograph of a horn) |
| in your monitor when there is no video signal being |
| input. |
|
|
Electric Guitar | Displays a background image (the photograph of an |
| electric guitar) in your monitor when there is no video |
| signal being input. |
|
|
Gray | Display a gray background in your monitor when there is |
| no video signal being input. |
|
|
Note
When “Conversion” is set to “Off”, no background is displayed even if “Wall Paper” is set to other than “None”.
Manual Setup (Multi Zone)
Use this menu to set the functions of the
■Speaker B (Speaker B setting)
Use this feature to select the location of the FRONT B speakers.
Choice | Descriptions |
Main | Select this setting when you use the speakers connected |
| to the EXTRA SP speaker terminals in the main room. |
| This unit outputs the same audio signals at the EXTRA |
| SP terminals as the FRONT A speaker terminals. |
|
|
ZoneB | Select this setting when you use the speakers connected |
| to the EXTRA SP speaker terminals in another room. |
| When you turn off the FRONT A and FRONT B is turned |
| on, all the speakers including the subwoofer in the main |
| room are muted and this unit outputs sounds at the |
| FRONT B terminals only. |
|
|
Notes
•If you connect headphones to the PHONES jack on this unit, the sound is output from both the headphones and the speakers connected to the EXTRA SP terminals when “Speaker B” is set to “ZoneB”.
•If a sound field program is selected when “Speaker B” is set to “ZoneB”, this unit automatically enters the Virtual CINEMA DSP mode (see page 60).
■Zone SP Assign (Zone speaker assignment)
Use this feature to assign the speaker terminals for Zone 2, Zone 3, and Zone 4. See page 116 for details.
■Party Mode Set (Party mode settings)
The party mode enables you to play the same source in multiple zones simultaneously (see page 118). Use “Party Mode Set” menu to configure the functions of this unit when this unit is in the party mode.
Graphical user interface (GUI) menu
Main 11ch Stereo (Main zone
Use this feature to select whether the sound field program of the main zone is fixed to “11ch Stereo” when this unit is in the party mode.
Choice | Descriptions |
Off | Select this setting to select the sound field program in the |
| main zone as you like. |
|
|
On | Select this setting to fix the sound field program of the |
| main zone to “11ch Stereo” mode when this unit is in the |
| party mode. |
|
|
Target : Zone2/Target : Zone3/Target : Zone4 (Party mode target zone setting)
Use this feature to specify which zone joins to the party mode.
Choice | Descriptions |
Disable | Select this setting not to join the selected zone to the |
| party mode. You can select the input source of the |
| selected zone independently even if this unit is in the |
| party mode. |
|
|
Enable | Select this setting to join the selected zone to the party |
| mode. When this unit is in the party mode, the zone |
| which this unit plays back the same source as the main |
| zone in the zones join in the party mode. |
|
|
■Zone2 Set/Zone3 Set/Zone4 Set (Zone 2/Zone 3/Zone 4 settings)
Zone2 Volume/Zone3 Volume/Zone4 Volume (Zone 2/Zone 3/Zone 4 volume)
Use this menu to select whether this unit controls the volume level of the audio signals output at the ZONE OUT (ZONE2, ZONE3, or ZONE4) jacks.
Choice | Descriptions |
Fixed | Select this setting when you want to control the volume |
| level of the selected zone on the external amplifier. This |
| unit fixes the ZONE OUT (ZONE 2 or ZONE 3) volume |
| level to a standard line level. |
|
|
Variable | Select this setting when you want to control the volume |
| level of the selected zone on this unit. You can adjust the |
| ZONE OUT (ZONE 2 or ZONE 3) volume level |
| simultaneously with CVOLUME +/– on the remote |
| control. |
|
|
Notes
•When “Zone2 Volume”, “Zone3 Volume”, or “Zone4 Volume” is set to “Fixed”, you cannot select the following parameters:
–Zone2 Max Vol./Zone3 Max Vol./Zone4 Max Vol.
–Zone2 Initial Vol./Zone3 Initial Vol./Zone4 Initial Vol.
–Zone2 Balance/Zone3 Balance/Zone4 Balance
•Even if you set “Zone2 Volume” to “Variable”, the volume control on this unit does not function to the output level of the ZONE DIGITAL OUT (COAXIAL) jack (see page 113).
Zone2 Max Vol./Zone3 Max Vol./Zone4 Max Vol. (Zone 2/Zone 3/Zone 4 Maximum volume setting)
Use this feature to set the maximum volume level in the Zone 2, Zone 3, or Zone 4.
Control range:
Control step: 5.0 dB
Note
The “Zone2 Max Vol.”, “Zone3 Max Vol.”, or “Zone4 Max Vol.” setting takes priority over the “Zone2 Initial Vol.”, “Zone3 Initial Vol.”, or “Zone4 Initial Vol.” setting. For example, “Zone2 Initial Vol.” is set to
Operation | Advanced |
|
|