Setting the speaker impedance and language
Caution
If you are to use
Before using this unit, set the speaker impedance of the connected speakers and the language of the menu items and messages.
1Make sure this unit is turned off.
2Press and hold IPROGRAM on the front panel and then press BMASTER ON/OFF inward to the ON
position to turn on this unit.
Press and hold IPROGRAM until “ADVANCED SETUP” appears in the front panel display.
PROGRAM While holding down
MASTER
PUSH ENTER
A D V A N C E D S E T U P
3Rotate IPROGRAM to select “SPEAKER IMP.”.
4Press IPROGRAM repeatedly to select “8ΩMIN” or “6ΩMIN”.
5Rotate IPROGRAM to select “LANGUAGE”.
6Press IPROGRAM repeatedly to select the desired language setting.
Choices: ENGLISH (English), JAPANESE (Japanese), FRENCH (French), GERMAN (German), SPANISH (Spanish), RUSSIAN (Russian)
Notes
•You can also select the language setting by using GUI menu. See page 95 for details.
•Some languages are not displayed in the front panel display or Zone OSD.
LANGUAGE | GUI menu | Front panel | Zone OSD | |
display | ||||
|
|
| ||
RUSSIAN |
|
| — | |
JAPANESE |
| — | — | |
Other languages |
|
|
|
··· The selected language is displayed.
—··· The selected language is not displayed. The menu items and messages are displayed in English.
Connections
7Press BMASTER ON/OFF to release it outward to the OFF position to save the new setting and turn off this unit.
The setting you made is reflected next time you turn on this unit.
Turning this unit on and off
■Turning on this unit
Press BMASTER ON/OFF on the front panel inward to the ON position to turn on this unit.
When you turn on this unit by pressing BMASTER ON/OFF, the main zone is turned on.
Note
After this unit is turned on, it takes approximately 20 seconds until this unit produces sounds, and while “Please wait” appears in the front panel display, this unit does not accepts the front panel operations and stores the remote control operations. This unit performs the stored remote control operations after “Please wait” disappears.
■Turning off this unit
Press BMASTER ON/OFF on the front panel again to release it outward to the OFF position to turn off this unit.
Notes
•AMAIN ZONE ON/OFF on the front panel as well as EPOWER and DSTANDBY on the remote control are operational only when BMASTER ON/OFF is pressed inward to the ON position.
•Basically, we recommend that you use the standby mode to turn off this unit.
■Set the main zone to the standby mode
Press AMAIN ZONE ON/OFF (or DSTANDBY) to setthe main zone to the standby mode.
In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.
■Turning on the main zone from the standby mode
Press AMAIN ZONE ON/OFF (or EPOWER) to turn on
the main zone.
y
•When you turn on this unit, there will be a delay for a few seconds before this unit can reproduce sound.
•These buttons are operational only when BMASTER ON/OFF is pressed inward to the ON position.
If there are some problems...
•First, turn off and then turn on this unit again.
•If problems persist, initialize the parameters of this unit. See page 127 for details.
Preparation
