Yamaha DSP-Z11 Audio and video signal flow, 29 En, Audio signal flow, Video signal flow, Notes

Audio and video signal flow

■Audio signal flow

InputOutput

HDMI

DIGITAL AUDIO (COAXIAL)

DIGITAL AUDIO (OPTICAL)

AUDIO

Notes

•2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI input jacks can be output at the HDMI OUT jacks only when “Support Audio” is set to “Other” (see page 94).

•The following types of audio signals can be only input at HDMI input jacks:

–DSD

–Dolby TrueHD

–Dolby Digital Plus

–DTS-HD Master Audio

–DTS-HD High Resolution Audio

Connections

■Video signal flow

Input	Output
HDMI	Preparation
COMPONENT
VIDEO

SVIDEO

VIDEO

Through

“Conversion”: “On” (see page 89)

y

You can deinterlace and convert the resolution of the video signals by using “Video” parameters. See page 89 for details.

Notes

•When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as follows:

1.COMPONENT VIDEO

2.S VIDEO

3.VIDEO

•This unit is equipped with the two COMPONENT VIDEO MONITOR OUT jacks and HDMI OUT jacks. The COMPONENT VIDEO MONITOR OUT 1 and 2 outputs the same video signals and you can use both COMPONENT VIDEO OUT jacks simultaneously.

•Digital video signals input at the HDMI input jacks cannot be output from analog video output jacks.

•The analog component video signals (with 480i (NTSC)/576i (PAL) of resolution only) are converted to the S-video or composite video signals and output at the VIDEO or S VIDEO MONITOR OUT jacks.

•The GUI signal is not output at the DVR OUT and VCR OUT jacks and is not recorded.

29 En