5Press 9ENTER.
The edit screen of the name of the currently selected control area appears in the display window (4).
BD/HD
6 | Press 9l / h repeatedly to move the cursor (_) to |
| the position you want to edit. |
|
|
7 | Press 9k / n repeatedly to select and enter the |
| desired character. |
Remote control features
Macro programming features
The macro programming feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button to start playback. The macro programming feature lets you perform all of these operations simply by pressing the CD macro button. The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros (see page 108).
■Recalling programmed macro-operations
Pressing 9k changes the character as follows: |
A to Z, a to z, 0, 1 to 9, space, - (minus), + (plus), / (slash) and |
: (colon). |
y
Pressing 9n changes the characters in reverse order.
8 Repeat steps 6 and 7 until you change all the letters |
you want. |
POWER | POWER | STANDBY | POWER | |
TV | AV |
|
| |
MULTI | PHONO | MD | ||
TAPE | ||||
|
|
| ||
BD | DVD | CD | ||
HD DVD | ||||
|
|
| ||
CBL | DTV | DVR | VCR | |
SAT | ||||
|
|
| ||
TUNER | DOCK | NET |
| |
USB |
| |||
|
|
| ||
|
|
| AMP | |
|
|
| TV | |
|
|
| SOURCE |
SELECT | SETUP ID | MACRO |
|
|
| MODE | ZONE |
SYSTEM MEMORY
1 2 3 4
Macro buttons
MACRO
9 Press 9ENTER to set the new name. |
“OK” appears in the display window (4) on the remote |
control if renaming was successful. |
y
When you want to rename the another name of the selected control area, press the input selector button 
(3) or 5SELECT l / h repeatedly to select the desired control area and then press 9ENTER and then carry out the operations of steps 4 through 9.
10Press GSETUP again to exit the setup menu.
The new name of the control area appears in the display window (4).
HDDVD
Note
“ERROR” appears in the display window (4) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.
1Press HMACRO on the remote control.
MACRO
2Press the desired macro button.
“M:the
3Press HMACRO again to exit from the macro- operation mode.
Notes
•While the remote control is running a macro program, it does not accept any other operation until it has completed running the program (the transmission indicator in the display stops flashing).
•Continue to aim the remote control at the component the macro is operating until the macro operation is complete.
•If you do not complete each of the operations within 30 seconds, this unit automatically exits from the
Operation | Advanced |
|
|
