Lyngdorf Audio Accessories, Operating voltage, Product Registration, CD-1serial number

Accessories

You should find the following in the accessory kit:

1.One mains cord

2.This manual

3.Customer registration form

4.Remote control

5.RS232 Cable for firmware upgrade from a PC

Operating voltage

The CD-1 is selectable to one of the following power ratings:

100V-120V~ at 50-60Hz with a power rating of 20W

220V-240V~ at 50-60Hz with a power rating of 20W

WARNING: Connect the power input only to the AC source printed on the label and the setting shown on the voltage selector switch. The warranty will not cover any damage caused by connecting to the wrong type of AC mains.

The CD-1 has three power modes:

1.ON – The [power] button will turn the CD-1 on. The CD-1 will start up in standby mode.

2.STANDBY – The [standby] button will put the CD-1 in standby mode or bring the CD-1 back from standby mode. If standby mode is requested while the tray is open, the CD-1 will close the tray before entering standby mode.

3.OFF – After Power [off] or Standby, the settings of CD-1 are retained. If the CD-1 was in random mode and/or repeat-all mode, this mode will also be retained. Please note that some parts of the mains entry section still carry live mains.

Product Registration

Please record the serial number of your product here for future reference. The serial number is printed on the label on the CD-1 rear panel. You will need this serial number, should you ever require service for your CD-1 Compact disc player.

CD-1 serial number: _____________________

Please fill out the enclosed customer registration form and submit it to Lyngdorf Audio so we can register you as owner of the unit and keep you informed of future upgrades of the product.

- 5 -