Lyngdorf Audio CD-1 Technical specifications, Audio, Protection, Mains, Parameter, Value

Technical specifications

All audio measurements, except frequency response, are measured with a 20KHz low- pass filter in accordance with AES-17. Measured on Unbalanced outputs - RCA (phono).

Audio

Parameter	Value	Note
Frequency response L/R	+/- 0.02 dB	20 – 20000 Hz
Signal-to-noise ratio	-115 dBA	(“infinity zero” track) A-wgt
Dynamic Range	-100 dBA	(output -60 dBFS 1kHz) A-wgt
Distortion: THD + N	0.0018 %
Crosstalk	-114 dB	125 – 16000 Hz
0db analog output level	3.8 Vrms
Unbalanced analog output	75 Ohm
impedance
Balanced analog output	100 Ohm
impedance
3 digital outputs:	AES, SPDIF Toslink
Selectable sample rates on	44.1kHz – 16 bits
digital outputs:	48 / 96 / 192 kHz – 24bits

Protection

Parameter	Value	Note
Grounding	Mains earth, chassis and audio
	ground are connected
	internally.
Over temperature	All heat sinks and mains-	Auto resetting thermal fuse in
	transformer.	mains transformer.

Mains

Parameter	Value	Note
Mains input connector	IEC 320 cold type	Mains lead supplied.
Mains voltage range	100-120V AC, 50–60Hz	Mains selector on 115V
Mains voltage range	200-240V AC, 50-60Hz	Mains selector on 230V
Internal mains fuse	T1Ah
Power consumption	2.5W	STANDBY mode.
Power consumption	20W	OPERATE mode, Playing CD

- 19 -