Speakers (Speaker
Select to adjust the speaker LFE level.
Headphones
(Headphone
Select to adjust the headphone LFE level.
Note
Depending on the settings of “Bass Out” (see page 85), some signals may not be output at the SUBWOOFER PRE OUT jacks.
■Dynamic Range (Dynamic range)
Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding bitstream signals.
Speakers (Speaker dynamic range)
Adjusts the dynamic range compression for the speakers.
Headphones (Headphone dynamic range)
Adjusts the dynamic range compression for the headphones.
Choice | Functions |
MAX | Preserves the greatest amount of dynamic range. |
|
|
STD | Adjusts the dynamic range to medium. When this unit is |
| decoding Dolby TrueHD signals, the dynamic range |
| control is always active regardless of the instruction of |
| the input source signals. |
|
|
MIN/AUTO | • MIN: Adjusts the dynamic range to narrow when this |
| unit is decoding bitstream signals (except Dolby |
| TrueHD). |
•AUTO: Adjusts the dynamic range according to the instruction of the input source signals when this unit is decoding Dolby TrueHD signals.
■S-Wave Control (Standing wave control)
Use this menu to activate or deactivate the specially customized parametric equalizer to reduce the effects of acoustic standing waves in the listening room. See page 44 for details.
Choice | Functions |
On | Activates the parametric equalizer. |
|
|
Off | Deactivates the parametric equalizer. |
|
|
■Parametric EQ (Parametric equalizer)
Use this feature to adjust the parametric equalizer of each speaker.
PEQ Data Copy (Parametric equalizer data copy)
Use this feature to copy the result data of the automatic setup to the manual configuration area. You can select the parametric equalizer type applied to the copied result data of the automatic setup. See page 46 for the descriptions of each parametric equalizer type.
ChoiceDescriptions
Flat → Manual Copies the result of the automatic setup that the “Flat” type parametric equalizer is applied to.
Front → Manual Manual Copies the result of the automatic setup that the “Front” type parametric equalizer is applied to.
Natural → Manual Copies the result of the automatic setup that the “Natural” type parametric equalizer is applied to.
Graphical user interface (GUI) menu
PEQ Select (Parametric equalizer type select)
Use this feature to select the parametric equalizer type that applied to the results of the automatic setup. See page 46 for the descriptions of each parametric equalizer type.
Choice | Descriptions |
Manual | Applies the manually configured parametric equalizer in |
| “Manual Setup”. |
|
|
Flat | Applies the “Flat” type parametric equalizer. |
|
|
Front | Applies the “Front” type parametric equalizer. |
|
|
Natural | Applies the “Natural” type parametric equalizer. |
|
|
Through | Does not use the parametric equalizer. |
|
|
Notes
•When you carry out the automatic setup, this unit automatically set “PEQ Select” to “Natural”.
•“Speaker Level” settings (see page 86) also changes corresponding to the setting of “PEQ Select”.
•This unit does not change the configurations of “Manual” even if you perform the automatic setup.
Manual parametric equalizer configuration of each speaker
Use this feature to adjust the tonal quality of each speaker. You can copy the results of the automatic setup for the base of the manual configuration by using “PEQ Data Copy”. Set “PEQ Select” to “Manual” in advanced.
1Press 9k / n / l / h to select “Test Tone” or the speaker you want to adjust.
Choice | Adjusted speaker |
Front L | Front left speaker |
|
|
Front R | Front right speaker |
|
|
Center | Center speaker |
|
|
Surround L | Surround left speaker |
|
|
Surround R | Surround right speaker |
|
|
Surround Back L | Surround back left speaker |
|
|
Surround Back R | Surround back right speaker |
|
|
Front Presence L | Front presence left speaker |
|
|
Front Presence R | Front presence right speaker |
|
|
Rear Presence L | Rear presence left speaker |
|
|
Rear Presence R | Rear presence right speaker |
|
|
Subwoofer L | Subwoofer left |
|
|
Subwoofer R | Subwoofer right |
|
|
Test Tone
Use this feature to select whether to turn on or off the test tone output while you are adjusting the tonal quality of each speaker.
Choice | Functions |
On | Outputs the test tone. |
|
|
Off | Does not output the test tone. |
|
|
Operation | Advanced |
|
|
