
Remote control features
3Press 9k / n repeatedly to select “LEARN” and then press 9ENTER.
The remote control enters the learning mode. “LEARN” and the name of the selected control area appears in the display window (4) alternately.
START
DVD
4Place this remote control about 5 to 10 cm (2 to 4 in) apart from the other remote control on a flat surface
so that their infrared transmitters are aimed at each other and then press 9ENTER.
Other remote control
RETURN MEMORY |
| TITLE BAND | LEVEL | 1 |
|
| SELECT |
|
|
| TUNER | CBL SAT | BD HD DVD | MULTI | TV | POWER |
DISPLAY | ENTER | PRESET/CH | SRCH MODEVOLUME | 2 | SYSTEM | MODEZONE | SETUP | SOURCE |
| AMP | DOCK | DTV | DVD | AV | POWER | |
MENU | 3 4 | MEMORY | MACRO | TV | NET USB | DVRVCR | CD | MD TAPE |
| STANDBYPOWER | ||||||
|
|
|
|
|
|
| ID |
|
|
|
|
|
| PHONO |
|
|
5 to 10 cm (2 to 4 in)
5Press the button for which you want to program the new function.
“START” appears in the display window (4).
RETURN MEMORY |
| TITLE BAND | LEVEL | 1 |
|
| SELECT |
|
|
| TUNER | CBL SAT | BD HD DVD | MULTI | TV | POWER |
DISPLAY | ENTER | PRESET/CH | SRCH MODEVOLUME | 2 | SYSTEM | MODEZONE | SETUP | SOURCE |
| AMP | DOCK | DTV | DVD | AV | POWER | |
MENU | 3 4 | MEMORY | MACRO | TV | NET USB | DVRVCR | CD | MD TAPE |
| STANDBYPOWER | ||||||
|
|
|
|
|
|
| ID |
|
|
|
|
|
| PHONO |
|
|
6Press and hold the button you want to program on the other remote control until “OK” appears in the display window (4).
“NG” appears in the display window (4) if learning was unsuccessful. In this case, start over from step 4.
|
| SELECT |
|
| TUNER | CBL SAT | BD HD DVD | MULTI | TV | POWER |
SYSTEM | MODE | SETUP |
|
| DOCK | DTV | DVD | AV | POWER | |
MEMORY | MACRO |
|
| NET USB | DVR | CD | PHONO |
| STANDBY | |
|
| ID |
|
|
|
|
|
|
|
|
| ZONE | SOURCE | TV | AMP |
| VCR | MD TAPE |
| POWER |
Other remote control
y
•When you want to program another function, repeat steps 4 and 6.
•When you continuously want to program another function for another control area, set the operation mode selector to FSOURCE and then press
5SELECT l / h repeatedly and then repeat steps 4 through 6. If you want to select “TV” as the control area, set the operation mode selector to FTV and then repeat steps 4 through 6.
Notes
•“ERROR” appears in the display window (4) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.
•This remote control can learn approximately 200 functions. However, depending on the signals learned, “FULL” may appear in the display before you program 200 functions. In this case, clear unnecessary programmed functions to make room for further learning.
•Learning may not be possible in the following cases:
–when the batteries in the remote control for this unit or other components are weak.
–when the distance between the two remote controls is too great or too small.
–when the remote control infrared windows are not facing each other at the appropriate angle.
–when the remote control is exposed to direct sunlight.
–when the function to be programmed is continuous or uncommon.
Changing source names in the display window (RNAME)
You can change the name of the control area (input source) that appears in the display window (4) on the remote control if you want to use a different name than the factory preset. This feature is useful when you have set an control area to control a different component.
1Set the operation mode selector to FSOURCE and then press an input selector button or (3) to select the desired control area.
The name of the control area you want to customize appears in the display window (4) on the remote control.
BD/HD
2Press GSETUP using a ballpoint pen or similar object.
“SETUP” appears in the display window.
3Press 9k / n repeatedly to select “RNAME” and then press 9ENTER.
The remote control enters the renaming mode. “RNAME” and the name of the selected control area appears in the display window alternately.
RNAME
BD/HD
y
You can change the renamed control area by pressing an input selector button or (3) or 5SELECT l / h repeatedly.
4Press 9k / n repeatedly to select
Each control area has both
7 Press GSETUP again to exit the setup menu. | BD | BD/HD |