Yamaha DSP-Z11 80 En, Stereo program parameter descriptions, Decoder parameter descriptions

Graphical user interface (GUI) menu

Sound field

parameter

Features

Rev. Level Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes.

Control range: 0 to 100%

Level	Source sound
	Rev. Level
	Time

■Stereo program parameter descriptions

Sound field	Features
parameter
Direct	2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog
(“2ch Stereo” only)	sources.
	Choices: Auto, Off

y

•Select “Auto” to bypass the decoders, DSP processors and the tone control circuitry only when “BASS” and “TREBLE” are set to “BYPASS” (see page 61).

•Select “Off” not to bypass the decoders, DSP processors and the tone control circuitry when “BASS” and “TREBLE” are set to “BYPASS”.

•When multi-channel signals are input, they are downmixed to 2 channels and output from the front left and right speakers.

•The low-frequency signals of the front left and right channels are redirected to the subwoofer in the following cases:

–“Bass Out” is set to “Front & SWFR” (see page 85).

–“Front” is set to “Small” (see page 84) and “Bass Out” is set to “SWFR” (see page 85).

Center Level

Surround L Level

Surround R Level

Sur.Back L Level

Sur.Back R Level

F.PRNS L Level

F.PRNS R Level

R.PRNS L Level

R.PRNS R Level

(“11ch Stereo” only)

11-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the volume level of each channel in the 11-channel stereo mode. The available parameters differ depending on the speaker settings.

Control range: 0 to 100%

■Compressed Music Enhancer mode parameter descriptions

The Compressed
Music Enhancer	Features
mode
Level	Straight enhancer or 11-channel enhancer effect level. Select “High” or “Low” to adjust the effect for the high-frequency.
(“Straight Enhancer”
	Choices: High, Low
and “11ch Enhancer”
only)

■Decoder parameter descriptions

Decoder parameter	Features
Panorama	Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well as the front
(“PLIIx Music” and “PLII Music”	speakers for a wraparound effect.
only)	Choices: Off, On
Center Width	Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely towards the center
(“PLIIx Music” and “PLII Music”	speaker or towards the front left and right speakers. A larger value moves the center channel output towards the front left
only)	and right speakers.
	Control range: 0 (center channel sound is output only from the center speaker) to
	7 (center channel sound is output only from the front left and right speakers)
	Initial setting: 3

80 En