Yamaha DSP-Z11 owner manual 120 En, Cooling fan operation mode FAN MODE, Bi-amplifiermode BI-AMP

Advanced setup

See page 119 for the operation of the advanced setup.

■ Cooling fan operation mode FAN MODE

Use this feature to set the operation of the cooling fan of this unit.

Choice	Descriptions
AUTO	Select this setting to set the fan to operate automatically
	according to the temperature of this unit.
CONT.	Select this setting to set the fan to activate continuously
	regardless of the temperature of this unit.

■Bi-amplifier mode BI-AMP

Use this feature to activate or deactivate the bi-amplifier function.

Choice	Descriptions
ON	Select this setting if you want to activate the bi-amplifier
	function.
OFF	Select this setting if you want to deactivate the bi-
	amplifier function.

Note

When “BI-AMP”is set to “ON”, the SUR.BACK/BI-AMP terminals cannot be used to connect surround back speakers in that the SUR.BACK/BI-AMP terminals are already used for the bi-amplifier connection (see page 27).

■Pre-amplifier mode PREAMP MODE

Use this feature to select whether you use this unit as the pre-amplifier in the main zone and use all the internal amplifiers for the other zones.

Choice	Descriptions
ON	Select this setting when you use this unit as the pre-
	amplifier in the main zone. The audio signals for the
	main zone are only output at the PRE OUT jacks of this
	unit. You can assign all speaker terminals for the other
	zones.
OFF	Select this setting to use the internal amplifiers of this
	unit for the main zone, Zone 2, Zone 3, or Zone 4.

■Recovery and backup of the system settings

RECOV./BACKUP

Use this feature to save and restore the settings of this unit.

Choice	Select
RECOVERY	Restoring the saved setting of this unit.
BACKUP	Saves the current settings of this unit.
CANCEL	Cancels the recovery or backup of the settings of this
	unit.

Notes

•This unit does not save the preset network/USB items, and system memory settings.

•If no settings are saved, you cannot select “RECOVERY”.

■Parameter initialization INITIALIZE

Use this feature to reset the parameters of this unit to the initial factory settings. You can select the category of parameters to be initialized.

Choice	Descriptions
DSP PARAM	Select this setting to initialize all the parameters of
	the sound field parameters (see page 77).
VIDEO	Select this setting except “Short Message” and “On
	Screen” (see page 90).
NETWORK	Select this setting except “Short Message” and “On
	Screen” (see page 90).
ALL	Select this setting to initialize all the parameters of
	this unit.
CANCEL	Select this setting to cancel the initialization
	procedure.

Notes

•Use “Initialize” in the sound field program menu to initialize the parameters of the desired program (see page 81).

•When the network settings are reset, “DHCP” in “Network” is automatically set to “On” (see page 92) and the registered client ID of this unit on your Yamaha MCX- 2000 is cleared (see page 68).

■ MAC address filter MAC FILTER

Use this feature to filter the access to this unit via LAN to control this unit by the MAC address of the accessing PC (see page 101).

Choice	Descriptions
ON	Only allows to accept the access from the PC whose
	MAC address is registered to this unit.
OFF	Allows to accept the access from any PC.

y

You can register the MAC address that is allowed to access when “MAC FILTER” is set to “ON” by using the Web browser (see page 101).

■TV format TV FORMAT

Use this feature to set the color encoding format of your television. Choices: NTSC, PAL

Initial setting:

[General and Korea models]: NTSC

[Other models]: PAL

Note

This setting is applied to the video monitor in the main zone, Zone 2, Zone 3, and Zone 4.

■ HDMI monitor check MONITOR CHECK

Use this feature to activate or deactivate the monitor check function of this unit.

Choice	Descriptions
YES	This unit receives the information of the available video
	signal resolutions from the video monitor connected via
	HDMI and you can only select the resolutions supported
	by the video monitor in “HDMI Resolution” (see
	page 90).
SKIP	You can select any resolution in “HDMI Resolution”.

■Language LANGUAGE

Use this feature to select the language of your choice that appears in the GUI (graphical user interface) menu, OSD display in the zone monitor and the messages that appear in the front panel display.

Choices: ENGLISH (English), JAPANESE (Japanese), FRENCH (French), GERMAN (German), SPANISH (Spanish), RUSSIAN (Russian)

Note

You can also select the language setting by using GUI menu. See page 95 for details.

LANGUAGE	GUI menu	Front panel	Zone OSD
		display
RUSSIAN			—
JAPANESE		—	—
Other languages

··· The selected language is displayed.

—··· The selected language is not displayed. The menu items and messages are displayed in English.

120 En