Manuals / Toshiba / TV and Video / DVR

Toshiba KV-HD01A manual APPENDIX 3. -- O.S.D Message, Meanings

Models: KV-HD01A

1 56

Download 56 pages 30.78 Kb

Page 47

APPENDIX 3. -- O.S.D Message

	No.	O.S.D Message	Meanings
	1	NO DISK	No hard disk detected after power on
	2	BATTERY LOW	Suggest user to change battery and set system time
	3	LOADING	System Boot up
	4	VIDEO LOSS	Video loss
	5	VIDEO IN n	Video input source
	6	KEY LOCKED	Key lock function is on

	7	KEY UNLOCKED	Key lock function is off

	8	BACKUP n1 / n2 NOW	During backup operation

	9	BACKUP COMPLETE	Backup complete

	10	HD3 SPACE NOT ENOUGH	HD3 has not enough space for backup

	11	NO ENTRY FOR BACKUP	Nothing can be backup

	12	BACKUP INCOMPLETE	Backup incomplete, since user press STOP key to stop it

	13	NOT FOUND	In Time Search function, system can not find the corresponding video

	14	END	Playback of recorded video reached end point

	15	DISK FULL	Hard disks are full, it happened only when the DISK FULL item in
	15	DISK FULL	main menu was set to STOP
			main menu was set to STOP
	16	EMPTY	User press PLAY key or use SEARCH function, but no video could be
	16	EMPTY	play.
			play.
	17	SET TO NTSC, PLS RESTART	System has be set to NTSC, please reboot (PAL is similar)

	18	SOFTWARE UPDATE	Software update

	19	PLEASE RESTART	System should be reboot after software updated

	20	NO DISK	User press save key without putting in a floppy disk, or disk error

	21	DATA NOT CONTINUOUS	System finds data in installed HDs cannot be used contiguously.
	21	DATA NOT CONTINUOUS	Suggest to remove HD2 and HD3 from system.
			Suggest to remove HD2 and HD3 from system.
	22	DISK ATTACHED	HD3 was attached

	23	DISK REMOVED	HD3 was removed

	24	DISK ERROR	HD3 detected error

	25	HDn ERROR AT xxxxx	Hard disk error during recording, where n is hard disk number and
	25	HDn ERROR AT xxxxx	xxxxx is hexadecimal location.
			xxxxx is hexadecimal location.
	26	NOT PRESENT	When user try to clear a disk (in main menu) that was not attached

	27	SAVE TO DISK	Start saving JPEG file

	28	SAVE TO Fnnn. JPG	Save to Fnnn. JPG (where nnn= 0..999)

	29	SAVE OK	Save JEPG ok
	30	ERROR	Floppy is protected or error

46

Image 47

Toshiba KV-HD01A manual APPENDIX 3. -- O.S.D Message, Meanings

Contents

DIGITAL RECODER KV-HD01A INSTALLATION OPERATING MANUALPOWER DISK T.REC A.REC S TOP3. INSTALLATION SAFETY PRECAUTIONSIMPORTANT PRECAUTIONS 1. PRODUCT FEATURES5. MAIN MENU 6. SPECIFICATIONSAPPENDIX 2. -- System Default LIMITED WARRANTYSAFETY PRECAUTIONS Retain this information for future reference the manufacturer’s instructionModel No. Serial No Purchase Date Dealer/Address/Phone Do not repair, disassemble and/or modify yourself IMPORTANT SAFETY INSTRUCTIONSDo not use the product when abnormality occurs Use the AC adapter only with the indicated power supply voltageDISCLAIMER Save Original Packing Materials IMPORTANT PRECAUTIONSDaily or weekly Maintenance COPYRIGHTS1.1 Product Introduction 1. PRODUCT FEATURES1.2 Product Features 2.1 Front View 2. DESCRIPTION OF THE FRONT/REAR VIEWPower Indicator Indicator of Alarm Recording ModeIndicator of Timer Recording Mode Indicator of Hard Disk StatusPower Switch 2.2 Rear ViewMUX MAIN MONITOR IN Connector S-VIDEO IN ConnectorFULL 2.3 Terminal BlockSW.OUT ALM.OUT3.1 Basic Connection 3. INSTALLATION3.2 System Information 3.3 Updating System Software 3.4 Video format NTSC/PAL selection 4. BASIC OPERATIONS 4.1 Configuring Recording Settings4.2.1 Manual Recording 4.2 Recording OperationsSTART 4.2.2 Timer RecordingTimer Timer↑↓ TO CHANGE ←→ TO MOVE4.2.4 Externally triggered Recording 4.2.3 Alarm Recordingplace 4.3.1 Fast Forward/Reverse 4.3 Playback OperationsOperation Status 4.3.3 Play Back Picture-by-picture 4.3.2 Slow Forward/Reverse4.4.1 Full List Search 4.4 Search Operations4.3.4 Play Back Recorded Video from a HDD of the mobile rack page 4.4.2 Alarm list Search4.4.3 Time Search 2 Select the TIME SEARCH and press theHighlight DISK and press the 4.5 Data Backup4.5.1 Backup Operations Stay on the DISK SETTING page 4.5.2 Archive Clips into Floppy Disk 4.6 Key Lock OperationRight/Left buttons 5. MAIN MENUMAIN MENU TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK SYSTEM KEY FUNCTIONS5.1 TIME/ TITLE 5.2 RECORD TIMER 5.3 REC SETTING 5.4 ALARM SETTING ON Enables pre-alarm recording. OFF Disables pre-alarm recording 5.5 COMMUNICATION 5.6 DISK SETTING 5.7 SYSTEM Alarm Storage Media 6. SPECIFICATIONSSoftware Upgradeable Operation Temperature2 RX 3 TX 1.SetupAPPENDIX 1. -- RS-232 Protocol 2. Communication Protocol2.2.2 Request Time Second Category=0x02 2.1 Keys and signals2.2 COMMAND Types 2.2.0 Command Main Category=0x02 2.2.1 Handshake Second Category=0x01Description of System State 2.2.4 Set Setup Values Second Category=0x042.2.3 Set Time Second Category=0x02 2.2.5 Request State Second Category=0x05APPENDIX 2. -- System Default RECORD TIMER RECORD ALARM COMMUNICATION DISK SYSTEM MAIN MENU TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISKSYSTEM GO TO COMM PAGE MAIN MENU TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK SYSTEM GO TO DISK PAGE MAIN MENU TIME/ TITLEMeanings APPENDIX 3. -- O.S.D MessageO.S.D Message System Requirements APENDIX 4. -- NETWORK VIEWINGConnecting KV-HD01 to your network Physical specification for Ethernet 1. Install the browsing software to your PC2. Open Network Viewer RJ-45 PIN configuration for EthernetPicture B PORT Type the designated port settingEnter the pre-set password of KV-HD01 Picture AViewing Image System status indicatorsChanging Record Properties Changing The Record & Timer propertiesALARM SETTING RECORD TIMERSAVE Change the Timer propertiesArchive Images to the computer NUMBER OF SAVINGClick to start your Image Viewer 3. Open the Image ViewerSTOP Viewing a still JPEG-imageQUIT PRINTDIGITAL VIDEO RECORDER LIMITED WARRANTY