Toshiba KV-HD01A manual Situation Status, HD3

BUZZER :

The BUZZER option is used to determine the embedded buzzer sounding a tone to signal the following situations. A tone lasts about two seconds long.

Situation	Status
Alarm	Alarm takes place
Video Loss	Video loss takes place
Disk Full	Disk is full
Load Default	Load factory default
Buzzer	Buzzer set to ON
Key Lock	Enable/disable key lock function
HD3	Power on /off mobile rack HDD
Backup	Backup operation complete
Timer	Timer activate/deactivate
HDD	Recording switching between HDD

ON : BUZZER is enabled.

OFF : BUZZER is disabled.

PASSWORD:

The PASSWORD option is used to set a 4 digit number password to prevent any unauthorized re-formatting of the hard disk drives and to use the network viewer.

OLD PASSWORD : Enter the pre-set password (or the standard password if this is the initial setting) to access the password setting system.

NEW PASSWORD : Enter a 4 digit number password of your choosing which will replace the pre-set password (or the standard password “9999”).

DEFAULT :

The DEFAULT option is used to reload the factory default setting.

39