Toshiba KV-HD01A manual System Information

3.2 System Information

You can display system settings information as shown on Table 3.2 A below at any time by pressing the DISPLAY button. However, when the unit is displaying a decoded image from a multiplexer, you must first switch the unit to encoded image displaying (The pictures is switching swiftly and the light ofMUX/DVR button is off) by pressing theMUX/DVR button. Each sequential press of the DISPLAY button displays a different message detailed in the following example. By default, the unit displays time, date, and an indicating bar of capacity status on a monitor as shown next.

Default display
(Capacity Used)	(Capacity Remaining)
09- 05-2001	16:13:02
(Date)	(System Time)

Press the DISPLAY button once; the unit will display the following sample message plus the default display. Press the DISPLAY button again; the unit will not display any OSD message. Press the button one more time to back to the default display.

Table 3.2 A.					Description of Table 3.2 A
				(HD1+HD2: 76GB): Total capacity of installed hard disk, 76 GB
HD 1+HD 2: 76G			11.2 HR
				(11.2 HR): Total 11.2 hour minimum guaranteed recording
QUALITY: HIGH			NTSC
					time available. Actual recording time may be
RATE: 6 HR			20 F/S
					longer in everyday use.
				(	): Timer record activated
				(	): Alarm record activated
HD	P	SIZE	POS	(QUALITY: HIGH): Record quality setting, HIGH
				(NTSC): NTSC system
1	Y	38 G	2.5%R (P)
				(RATE: 6 HR): Setting of Record time mode, 6 hours
2	Y	38 G	0%R (P)
				(20 F/S): Record speed setting, 20 fields/sec
3	.	.
				(HD): Hard disk Compartment
				(P): Y Hard disk installed; . No hard disk installed
				(SIZE 38GB): The capacity of the installed hard disk
				POS: Percentage of system; R: Recording; P: Playback

14