Toshiba KV-HD01A manual Time/ Title

5.1 TIME/ TITLE

This device is able to print inerasable system time and title information directly onto images during recording. This page allows users to set the time and desired title, and to decide if the function is to be activated. The entries are listed as follows.

MAIN MENU

TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK

SYSTEM

GO TO TIME/ TITLE PAGE

TIME STAMP :

TIME/TITLE

TIME STAMP : OFF

TIME SETTING : SET

TITLE STAMP : OFF

TITLE SETTING : SET

MAIN PAGE

REC TIME STAMP

The Time Stamp option is used to stamp the system time onto images during recording process. The Time Stamp is inerasable.

ON : Enables the device to stamp the time onto images during recording. OFF : Disables the stamping function.

TIME SETTING :

This option is used to set the system time and date.

TITLE STAMP :

The Title Stamp option is used to stamp the system title onto images during the recording process. The Title Stamp is inerasable.

ON : Enables the device to stamp programmed title onto images while recording. OFF : Disables the stamping function.

TITLE SETTING :

This option is used to set the system title. The Title can consist of up to twelve characters with the letters A-Z, numbers 0-9 or blank spaces.

NOTE: If you wish to have system-time on an archived image in a floppy, the “TIME STAMP” option must be set to “ON” for recording.

NOTE: No matter whether the “TIME STAMP” option is set to “ON” or “OFF”, the unit will always encode the system time into the video while recording. So you can always have system time to be displayed on the screen by pressing the “DISPLAY” button. However, if two time messages have overlapped on the screen, please press the “DISPLAY” button to stop decoding time from the video so that the unit will only display the stamped time only.

31