Toshiba KV-HD01A manual Install the browsing software to your PC, Open Network Viewer

RJ-45 PIN configuration for Ethernet

PIN NO.	PIN Assignment
1.	TX +
2.	TX -
3.	RX +
4.	Not Connected
5.	Not Connected
6.	RX -
7.	Not Connected
8.	Not Connected

Physical specification for Ethernet

Wire Type	Cat. 5
Connector Type	RJ-45
Max. Cable Length	30 M
Hub Wiring Configuration	Straight Through

Browsing image over the network

The Network Viewer can perform the following functions.

View live image and still JPEG image.

Play back recorded images.

Save JPEG-image locally.

Change regular record, event record, and Timer properties

Please take instructions as follows to install the browsing software and operate it.

1. Install the browsing software to your PC

Insert the CD-R comes with the KV-HD01 and follow the onscreen instructions to install it. The browsing software contains two programs, the Network Viewer and the Image Viewer.

NOTE: The settings of display area of a local PC must be set at least 800 x 600 and small font.

2. Open Network Viewer

Open the START menu, point to Program, TOSHIBA Network Viewer and click Network Viewer. The dialog box appears as shown in Picture A. Select Network VIEWER SYSTEM to show the LOGIN dialog box as shown in Picture B. Type IP of the KV-HD01 and password and click OK button. (The password is same as the KV-HD01 set. If you don’t set a password for the KV-HD01, the default is 9999)

48