Data Backup, Backup Operations | Toshiba KV-HD01A specs

4.5 Data Backup

4.5.1 Backup Operations

There are three ways available to duplicate the recorded video from HD 1 and HD 2 to HD 3. Please take the following steps to proceed.

(1) Set HD 3 to BACKUP first. Take the following steps.

Press the SETUP button to enter the setup mode and select the DISK.

Highlight DISK and press the	SAVE
	ENTER
	/

ENTER/SAVE button to enter the DISK SETTING page.

Then set HD 3 USAGE to BACKUP.

MAIN MENU

TIME/ TITLE

RECORD TIMER

RECORD

ALARM

COMMUNICATION

DISK

SYSTEM

GO TO DISK PAGE

DISK SETTING

REFORMAT	----------	HD 1
HD 3 USAGE	----------	BACKUP
BACKUP		REC/PLAY

MAIN PAGE

SET HD 3 USAGE

(2)FULL: Duplicating all the recorded video from HD1 and HD 2 to HD3.

Stay on the DISK SETTING page.

Use the Up/Down buttons to highlight BACKUP; select FULL, then press the ENTER/SAVE button to proceed.

ENTER

/

SAVE

MAIN MENU

TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK

SYSTEM

GO TO DISK PAGE

DISK SETTING

REFORMAT

HD 3 USAGE

BACKUP----------------FULL

ALARM

SELECT

MAIN PAGE

BACKUP ALL TO HD 3

27

Image 28

Toshiba KV-HD01A Data Backup, Backup Operations, System GO to Disk Disk Setting Reformat HD 3 Usage, Main Backup ALL to HD

Contents

Installation Operating Manual Table of Contents Specifications Limited WarrantyMain Menu Apendix 4. -- Network Viewing Safety Precautions FCC Notice Manufacturer’s instruction Graphic symbol definitions Symbol Meaning Important Safety InstructionsIndication definitions Meaning Observe the following when installing Disclaimer Important Precautions Daily or weekly MaintenanceCopyrights Save Original Packing Materials Product Features Product FeaturesProduct Introduction Description of the FRONT/REAR View Front View Indicator of Alarm Recording Mode Indicator of Timer Recording ModeIndicator of Hard Disk Status Power Indicator Rear View Terminal Block Installation Connecting with a Single Camera or a Quad ProcessorConnecting with a Multiplexer Basic Connection System Information Quality High NtscRate 6 HR Size POS Updating System Software Video format NTSC/PAL selection Configuring Recording Settings Set up the REC Time Mode when a multiplexer is connectedBasic Operations Ntsc System Manual Recording Recording OperationsPAL System Timer Recording Start END TIMER---------------------------- SET Main SET REC Timer REC Schedule Start ENDREC Enable Timer Main Timer REC Enable Externally triggered Recording Alarm Recording60F/S Place Operation Status Playback OperationsFast Forward/Reverse Slow Forward/Reverse Play Back Picture-by-picture Play Back Recorded Video from a HDD of the mobile rack Search OperationsFull List Search Alarm list Search Search Full List Alarm List Time Search MM DD Year HH MMTime Search Search Data Backup Backup OperationsSystem GO to Disk Disk Setting Reformat HD 3 Usage Main Backup ALL to HD Alarm Select Main Backup Alarm to HD Disk Setting Reformat HD 3 UsageMain Backup Part to HD Total 41 M Ready to GO OK Cancel Save ENTER/SAVE button Archive Clips into Floppy Disk Key Lock OperationSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Main Menu Right/Left buttons Time Setting Title SettingTIME/ Title Title Stamp Record Timer TimerREC Schedule Start END 0600-1600 1200-1800 60 F/S REC SettingREC Quality Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP Comm Setting NET Enable OFF NET Setting SET Main SET RS232Communication RS232 Disk Setting Backup Full Disk REFORMAT/CLEAR System Flicker Reduction Situation Status HD3 Ntsc PAL SpecificationsJpeg General Command Format SetupCommunication Protocol Keys and signals Command TypesCommand Main Category=0x02 Handshake Second Category=0x01 Request Time Second Category=0x02 Set Setup Values Second Category=0x04 Set Time Second Category=0x02Request State Second Category=0x05 Description of System State Appendix 2. -- System Default Slave Battery LOW Backup CompleteNo Entry for Backup Backup Incomplete Connecting KV-HD01 to your network Apendix 4. -- Network ViewingSystem Requirements KV-HD01A Install the browsing software to your PC RJ-45 PIN configuration for EthernetPhysical specification for Ethernet Open Network Viewer Picture a Picture B System status indicators Viewing ImagePlay List PgUp & PgUp Changing The Record & Timer properties Changing Record PropertiesRate Quality Change the Timer properties Archive Images to the computerNumber of Saving Save Abort Exit Open the Image Viewer Viewing a still JPEG-image QuitPrint Stop Digital Video Recorder