Toshiba KV-HD01A manual Playback Operations, Operation Status, Fast Forward/Reverse

4.3 Playback Operations

This section shows you how to operate the fast, slow, and single-picture playback functions, and details how the unit is to playback a file in different operation status. Please refer to the following paragraphs specifying the relevant details. When playing a file, the monitor should display a flashing PLAY

message and the PLAY button will light up indicating that the unit is in the playback status.

Operation Status

A. From REC mode to Playback mode

(In live mode, directly press “PLAY” button to play a latest recorded video)

REC→ [Stop] → [Play]	Play the latest recorded file
[Play: to the end of the file]	Show the ending message
	(Using search function to replay
	the file if required)
[Stop] → [Play]	Play the file from the stop position
B. Search to play back a particular recorded video
Search→ [Play]	Play a selected file
[Play to the end of the file]	Show the ending message
	(Search again to replay the file if
	required)
[Stop] → [Play]	Play the file from the stop position
C. Play Back From The Oldest Data
[Stop: Press the “STOP” button for three seconds] → [Play]	play back the oldest recorded video

4.3.1 Fast Forward/Reverse

There are 5 speeds available for playback: 2x, 4x, 8x, 16x, and 30x. While playing back recorded video at recorded speed:

Forward: Press the FWD button to view the recorded video in the forward direction at a speed faster than the recorded speed. Each subsequent press of the FWD button increases the rate.

Reverse: Press the REV button to view the recorded video in the reverse direction at a speed faster than the recorded speed. Each subsequent press of the REV button increases the rate.

Normal: Press the PLAY button to return to the normal speed of playback.

23