Alarm Recording, Externally triggered Recording | Toshiba KV-HD01A

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM REC RATE, ALM REC QUALITY, ALARM STATUS, ALM DURATION, and PRE-ALARMsettings, please refer to section 5.4 for more details.

(1) Press the SETUP button to enter the MAIN MENU.

ENTER

/

(2) Select ALARM and press the SAVE ENTER/SAVE button to enter the ALARM SETTING.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If pre-alarm recording is required, set PRE-ALARM to ON.

(4)To activate the alarm recording, set ALARM OPERATION to ON. To deactivate it, set ALARM OPERATION to OFF.

MAIN MENU

TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK

SYSTEM

GO TO ALARM PAGE

ALARM SETTING

ALM OPERATION		: OFF
REC RATE		: 60F/S
REC QUALITY		: HIGH
ALM TYPE		: NO
ALM DURATION		: NON STOP
PRE- ALARM		: OFF

MAIN PAGE

ALARM REC ENABLE

4.2.4 Externally triggered Recording

You can use an external switch to turn the recording function of the DVR on/off to record video into the hard-disk drive by connecting the REC exposure contact on the rear panel of the DVR. Please refer to section 2.3 for more details.

21

Image 22

Toshiba KV-HD01A manual Alarm Recording, Externally triggered Recording, 60F/S

Contents

Installation Operating Manual Table of Contents Main Menu SpecificationsLimited Warranty Apendix 4. -- Network Viewing Safety Precautions FCC Notice Manufacturer’s instruction Graphic symbol definitions Symbol Meaning Important Safety InstructionsIndication definitions Meaning Observe the following when installing Disclaimer Copyrights Important PrecautionsDaily or weekly Maintenance Save Original Packing Materials Product Features Product FeaturesProduct Introduction Description of the FRONT/REAR View Front View Indicator of Hard Disk Status Indicator of Alarm Recording ModeIndicator of Timer Recording Mode Power Indicator Rear View Terminal Block Connecting with a Multiplexer InstallationConnecting with a Single Camera or a Quad Processor Basic Connection Rate 6 HR System InformationQuality High Ntsc Size POS Updating System Software Video format NTSC/PAL selection Basic Operations Configuring Recording SettingsSet up the REC Time Mode when a multiplexer is connected Ntsc System Manual Recording Recording OperationsPAL System Timer Recording Start END REC Enable TIMER---------------------------- SETMain SET REC Timer REC Schedule Start END Timer Main Timer REC Enable Externally triggered Recording Alarm Recording60F/S Place Operation Status Playback OperationsFast Forward/Reverse Slow Forward/Reverse Play Back Picture-by-picture Play Back Recorded Video from a HDD of the mobile rack Search OperationsFull List Search Time Search Alarm list SearchSearch Full List Alarm List Time Search MM DD Year HH MM Search System GO to Disk Disk Setting Reformat HD 3 Usage Data BackupBackup Operations Main Backup ALL to HD Main Backup Part to HD Total 41 M Ready to GO OK Cancel Alarm Select Main Backup Alarm to HDDisk Setting Reformat HD 3 Usage Save ENTER/SAVE button Archive Clips into Floppy Disk Key Lock OperationSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Main Menu Right/Left buttons TIME/ Title Time SettingTitle Setting Title Stamp REC Schedule Start END Record TimerTimer 0600-1600 1200-1800 60 F/S REC SettingREC Quality Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP Communication Comm SettingNET Enable OFF NET Setting SET Main SET RS232 RS232 Disk Setting Backup Full Disk REFORMAT/CLEAR System Flicker Reduction Situation Status HD3 Ntsc PAL SpecificationsJpeg General Command Format SetupCommunication Protocol Command Main Category=0x02 Handshake Second Category=0x01 Keys and signalsCommand Types Request Time Second Category=0x02 Request State Second Category=0x05 Set Setup Values Second Category=0x04Set Time Second Category=0x02 Description of System State Appendix 2. -- System Default Slave No Entry for Backup Battery LOWBackup Complete Backup Incomplete System Requirements Connecting KV-HD01 to your networkApendix 4. -- Network Viewing KV-HD01A Physical specification for Ethernet Install the browsing software to your PCRJ-45 PIN configuration for Ethernet Open Network Viewer Picture a Picture B Play List System status indicatorsViewing Image PgUp & PgUp Rate Changing The Record & Timer propertiesChanging Record Properties Quality Number of Saving Save Change the Timer propertiesArchive Images to the computer Abort Exit Open the Image Viewer Print Viewing a still JPEG-imageQuit Stop Digital Video Recorder