Appendix
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
15
Appendix
14
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Image Sensor
¼" Progressive Color CCD
Total Pixels
692 (H) x 504 (V) = 350K total
Maximum Resolution
VGA (640x480)
Frame Rate
30fps
25fps at 320x240 is the recommended
setting for optimal image quality
Lens
8 mm,D-mount
Color
Up to 16.8 million true color (24-bit)
Software Interface
WDM driver and Twain interface
Image Control (Using ArcSoft
Software)Color (RGB) and Brightness
Adjustment,Gamma Correction, Shutter
Speed (Exposure),Hue and Gain Control
Audio
Built-in microphone
PC/Mac Interface
USB (cable attached)
USB Cable Length
4.33'/1.32m
Operating Temperature
0–40°C/32–104°F
Weight
4 lb/8.8 kg
Gooseneck
18"/45 cm flexible gooseneck
Power
Provided by USB port
Operating Systems
Microsoft Windows:98, 98SE,2000, ME, XP
Mac:OS 8.6, 9.0, X
Included Software
ArcSoft's VideoImpression™ and
PhotoStudio® software
Specifications are subject to change without
notice.
Troubleshooting

I’ve installed the FlexCam USB. Why doesn't the picture appear?

Connect the FlexCam USB to the computer using the supplied USB cable.Ensure
that the USB port is enabled in your computer’s BIOS and in the Windows Control
Panel/System Device Manager.

How do I know the driver for the FlexCam USB has been properly installed?

Right-click the My Computer icon on the desktop.Choose Properties. Click the
Hardware tab,then Device Manager.Click the plus sign next to the icon labeled
Imaging.You should see VGA CCD Camera with USB Interface.If the Imaging fold-
er is missing,you need to reinstall the drivers.

How do I capture audio?

Audio can be captured through the microphones on the FlexCam USB and passed to
the computer through the USB cable.Audio can be captured using VideoImpression.

What do I need for videoconferencing and video mail?

The FlexCam USBcamera provides the audio and video.You’ll also need headphones
or speakers and videoconferencing software (e.g.,Microsoft NetMeeting®).

Why can’t I install the FlexCam USB with Windows 95?

Windows 95 does not support the FlexCam USB.You will need to upgrade to
Windows 98 release II (or a later version) to use the FlexCam USB.

Can I easily switch between multiple USB video capture devices on Mac OS?

No.To switch between devices,you must uninstall the driver(s) for one device and
install the driver(s) for the other.

Why doesn’t the FlexCam USB work after installing the drivers on Mac OS?

Connect the FlexCam USB to the computer using the supplied USB cable.Ensure
that there are no other USB video capture devices connected.

Why do I get a TWAIN error when I click Acquire in PhotoStudio 4.0 for Mac?

The PhotoStudio image capture feature is not supported by Mac operating systems.
Capture the image using VideoImpression instead and then use PhotoStudio to open
and edit the image.
Appendix Specifications