ArcSoft Software
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
7

To install USB drivers on a Mac

The FlexCam USB is compatible with Mac OS 8.6 through OS X.
1. Insert the USB Software and Driver Disk into the CD-ROM drive.
2. Double-click the ArcSoft icon to open the CD content window.
3. Double-click the USB Camera folder to open it.Then,double-click on the
folder that corresponds with your operating system.
4. Double-click the FlexCam USB 2.0 Installer.When
the drivers are installed,restart the computer.
5. Plug the USB cable into a USB port on the Mac.
Getting Started
6
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Figure 6.Contents of USB Software and Driver CD
The USB Software and Driver Disk includes two programs for video capture and
editing:VideoImpression 1.6 and PhotoStudio 5 (PhotoStudio 4 on the Mac).
Please note that the VideoImpression 1.6 version on this CD is manufactured
specifically for ClearOne products and may therefore differ from the standard
version of VideoImpression 1.6. Both products have built-in help systems to help
you make the most of your video and still captures.
Installation

To install on a Windows OS

1. Right-click the ArcSoft CD icon and select Explore.
2. Double-click Setup.exe.
3. Follow the onscreen prompts.Both programs are installed through the same
installation wizard.
4. Restart your computer.
ArcSoft Software
Figure 9.Installing the ArcSoft programs
Figure 7.Contents of USB Camera Folder
Figure 8.Installer icon