9ENTER.

Optimizing the speaker setting for your listening room (YPAO)

15Once the setting has been completed, press

9ENTER.

This unit starts the measurements of the speaker angles.

16Once the following display appears in the video monitor, move the optimizer microphone to the “(2)” position on the microphone base.

35 Equalizing

Level

Put the microphone at

Angle Check

2nd listening position

Next:ENTER

Angle

 

1

 

 

Result

3

2

17Press 9ENTER to resume the measurements.

18Once the following display appears in the video monitor, move the optimizer microphone to the “(3)” position on the microphone base.

48 EnManual background Equalizing

Level

Put the microphone at

Angle Check

3rd listening position

Next:ENTER

Angle

 

1

 

 

Result

3

2

19Press 9ENTER to resume the measurements.

20Once the measurement procedure has been complete, following display appears in the video monitor.

See page 45 for details.

 

Angle Check

 

Retry

 

 

 

Angle

Exit

Detail

 

 

 

Result

Setup

Measurement Over

 

 

Successfully

For other configuration of the listening position

The following examples indicate the measurement points when there is a listening position or are two listening positions.

Example 1: Two listening positions

We recommend that you make measurements in front of and behind the listening positions as well as the listening positions.

3

Manual background1Manual backgroundManual background2Manual background

4

Example 2: One listening position

We recommend that you make measurements around the listening position as well as the listening position.

5

4Manual background1Manual background2

3

48 En

Page 48
Image 48
Yamaha DSP-Z11 owner manual 48 En, 3 12 4, 5 412 3, 9ENTER