Yamaha DSP-Z11 Input Select, 81 En, Initialize Program parameters initialization, Operation

	Graphical user interface (GUI) menu
Decoder parameter	Features
Dimension	Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front or towards the rear.
(“PLIIx Music” and “PLII Music”	Control range: –3 (towards the rear) to +3 (towards the front)
only)
	Initial setting: STD (standard)
Center Image	DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center channel to make the
(“Neo:6 Music” only)	center channel more or less dominant as necessary.

Control range: 0.0 (center channel sound is output only from the front left and right speakers) to

1.0(center channel sound output only from the center speaker)

Initial setting: 0.3

■Initialize (Program parameters initialization)

Use this feature to initialize the parameter of the selected sound field program.

Choices: No, Yes

Rev. Level

Dialogue Lift

Initialize No

Yes

•Select “Yes” and then press 9ENTER to set the program parameters to the factory default settings.

•Select “No” (or press 9l) to cancel the program parameter initialization.

y

Use “DSP PARAM” of “INITIALIZE” in “Advanced setup” to initialize the parameters of all sound field programs (see page 120).

Input Select

Use this feature to reassign digital input/outputs, select the input signal, rename the inputs, or adjust the level of the signal input at each input source.

Input source Sub input source		Parameter
TUNER	—	Volume Trim
		Rename
MULTI CH		Volume Trim
	—	Rename
		Multi CH Assign
		BGV
PHONO		I/O Assignment
CD		Audio Select
CD-R		Decoder Mode
		Volume Trim
MD/TAPE
		Rename
BD/HD DVD	—
DVD
DTV
CBL/SAT
DVR
VCR
V-AUX		I/O Assignment
	—	Audio Select
		Decoder Mode
		Volume Trim
		Rename
DOCK	—	Volume Trim
		Rename

Notes

•Some parameters described above may not be available for all input sources and some parameters are only available for specific input sources.

•You can set “Volume Trim” for each sub input source separately.

•The “Play Style” setting is effective to both “PC/MCX” and”USB”.

■I/O Assignment

(Input/output assignment)

Use this feature to assign the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.

Once the input/output jacks are reassigned, you can select the corresponding component by using the DINPUT selector (or the input selector buttons (3)).

I/O Assignment	Coaxial Input
Audio Select	Optical Input
Decoder Mode	Optical Output

Example 1: Assigning the CD DIGITAL INPUT COAXIAL jack to “VCR”.

Operation Advanced

			1	Select “Input Select” in the GUI menu and then select
NET/USB	PC/MCX	Volume Trim
		Play Style		“VCR”.
	NET RADIO	Volume Trim
			2	Select “I/O Assignment” and then “Coaxial Input”.
	USB	USB Select
		Volume Trim
		Play Style
			3	Select “5CD”.

81 En