Yamaha DSP-Z11 owner manual Before starting the automatic setup, 42 En, Notes

Optimizing the speaker setting for your listening room (YPAO)

This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening environment.

This unit is equipped with various automatic setup features. You can select the automatic setup features according to your preference.

Quick automatic setup

Use this feature to carry out the automatic setup quickly. You can optimize the basic parameters of the sound in the listening room automatically.

☞ P. 43

Basic automatic setup

Use this feature to customize the automatic setup and review the result of the measurements. You can set the parameters that this unit sets in the automatic setup procedure and review the results of the measurements.

☞ P. 44

Advanced automatic setup

Use this feature to make fine-adjustments of the sound. You can optimize the setup of this unit for multiple listening positions in a listening room, and/or for the effect of the sound field programs.

☞ P. 46

Before starting the automatic setup

Make sure of the following check points before starting the automatic setup operations.

❏Speakers are connected appropriately.

❏Headphones are disconnected from this unit.

❏This unit is turned on.

❏The connected subwoofer is turned on and the volume level is set to about half way (or slightly less).

❏The crossover frequency controls of the connected subwoofer is set to the maximum.

VOLUME		CROSSOVER
		HIGH CUT
MIN	MAX	MIN	MAX

Controls of a subwoofer (example)

❏If you use the external amplifiers (see page 35), the amplifiers are turned on and the settings are appropriate.

❏The room is sufficiently quiet.

❏Set the operation mode selector on the remote control to

FAMP.

Notes

•Be advised that it is normal for loud test tones to be output during the automatic setup procedure.

•To achieve the best results, make sure the room is as quiet as possible while the automatic setup procedure is in progress. If there is too much ambient noise, the results may not be satisfactory.

Notes

•Sometimes due to interaction with the room, you may notice irregular results when setting the level and/or distance of the main speakers. If this happens, THX Ltd. recommends setting them manually.

•Sometimes due to the electrical complexities of subwoofers and the interaction with the room, THX Ltd. recommends setting the level and the distance of the subwoofer manually.

42 En