Yamaha DSP-Z11 90 En, HDMI Processing HDMI video processing, Component I/P Component interlace

Graphical user interface (GUI) menu

■HDMI Processing (HDMI video processing)

Use this feature to select whether this unit processes the video signals input at the HDMI IN jacks.

Choice	Functions
Off	Select this setting when you do not want this unit to
	process the video signals input at the HDMI IN jacks
	even if “Conversion” is set to “On”.
On	Select this setting when you want this unit to process the
	video signals input at the HDMI IN jacks when
	“Conversion” is set to “On”.

■Component I/P (Component interlace/

progressive conversion)

Use this feature to activate or deactivate the analog interlace/ progressive conversion of the analog video signals input at the composite video, S-video and component video jacks so that the analog video signals deinterlaced from 480i (NTSC)/576i (PAL) to 480p/576p are output at the COMPONENT MONITOR OUT jacks.

Choice	Functions
On	Activates the analog interlace/progressive up-conversion
	of the analog video signals.
Off	Deactivates the analog interlace/progressive up-
	conversion of the analog video signals.

Notes

•If your video monitor does not support analog video signals with 480p/576p of resolution, the GUI screen may not be displayed on your video monitor when “Component I/P” is set to “On”. In such a case, set “INITIALIZE” in “Advanced setup” parameter to “VIDEO” (see page 120).

•When you set “HDMI Processing” to “On”, you may not set “Component I/P” in some cases.

■HDMI Resolution

(HDMI video signal resolution)

Use this feature to activate or deactivate the HDMI up-scaling of the analog and HDMI video signals input at the composite video, S- video and component video and HDMI IN jacks so that the up- scaled video signals are output at the HDMI OUT jacks.

This unit up-scales the analog video signals as follows:

•480i (NTSC)/576i (PAL) → 480p/576p, 1080i, 720p, or

1080p

•480p/576p → 1080i, 720p, or 1080p

•1080i → 480p/576p, 720p, 1080p

•720p → 480p/576p, 1080i, 1080p

Choice	Functions
Through	Does not up-scale any video signals.
480p (or 576p),	Up-scales video signals to 480p or 576p, 1080i, 720p, or
1080i, 720p,	1080p of resolution.
1080p

Note

The input video signals may be down-scaled depending on the setting of “HDMI Resolution”.

■HDMI Aspect (HDMI aspect ratio)

Use this feature to select whether this unit converts the aspect ratio of 4:3 video signals and outputs at the HDMI OUT jacks.

Choice	Functions
Through	Does not make any adjustments to the aspect ratio for the
	HDMI video signal sources.
16:9 Normal	Displays video images with the aspect ratio of 4:3 on
	your video monitor with the aspect ratio of 16:9. Black
	stripes appear on the right and left sides as a result.
Smart Zoom	Fits video images with the aspect ratio of 4:3 to your
	video monitor with the aspect ratio of 16:9. The signals
	are input with 720p, 1080i or 1080p of resolution, this
	setting does not affect the video signals output at the
	HDMI OUT jack.

Notes

•When “HDMI Resolution” is set to “Through”, you cannot make any adjustments to “HDMI Aspect”.

•If the aspect ratio of the input video source is other than 4:3, this unit automatically ignores the setting of “HDMI Aspect”.

•When “HDMI Aspect” is set to “Smart Zoom”, the video images of the edge of the video monitor are rather stretched.

■Short Message (Short message display)

Use this feature to activate or deactivate the short message display displayed in the main zone video monitor function.

Choice	Functions
On	Activates the short message display function.
Off	Deactivates the short message display function.

Note

The short message display does not appear in the following cases:

–when the component video signals with 720p, 1080i or 1080p resolutions are input

–when HDMI video signals are input

■On Screen (On-screen display time)

Use this feature to set the time for which the iPod menu, or NET/ USB menu is displayed in the video monitor after you perform a certain operation.

Choice	Functions
Always	Displays the menu unceasingly during an operation.
10sec	Turns off the menu 10 seconds after you perform a
	certain operation.
30sec	Turns off the menu 30 seconds after you perform a
	certain operation.

y

This setting is applied to the GUI menu in the main zone and OSD in Zone 2, Zone 3, or Zone 4.

■Position (GUI screen position)

Use this feature to adjust the vertical and horizontal position of the GUI screen.

Control range: –5 (downward/left) to +5 (upward/right)

Short Message	/ :0	/ :0
On Screen		+
Position
Wall Paper

90 En