
6Press GSETUP again to exit from the setup mode.
Note
“ERROR” appears in the display window (B) if you press more than one button simultaneously.
Clearing configurations
You can clear all changes made in each function set, such as learned functions, macros, renamed control area names and setup remote control ID.
■Clearing function sets (CLEAR)
1Press GSETUP on the remote control using a ballpoint pen or similar object.
“SETUP” appears in the display window (4).
2Press 9k / n repeatedly to select “CLEAR” and then press 9ENTER.
The remote control enters the clear mode. “CLEAR” and “L:the
CLEAR
L:DVD
3Press 9k / n repeatedly to select the desired clear mode.
Clear mode | Descriptions |
|
|
L:DVD (etc.) | |
| learned functions the respective control area. You can |
| change the control area to be cleared by pressing the desired |
| input selector button or (3) or 5SELECT l / h |
| repeatedly. |
|
|
L:AMP | Sets all learned functions for controlling the amplifier |
| functions to the initial factory settings. Set the operation |
| mode selector to FAMP to select this clear mode. |
|
|
L:TV | Clears all learned functions for TV control area. Set the |
| operation mode selector to FTV to select this clear mode. |
|
|
L:ALL | Clears all learned functions. |
|
|
M:DVD (etc.) | (M:Name of the selected macro button) Clears the macro |
| programmed for the selected macro button (see page 108). |
| The assigned macro to the selected macro button reverts to |
| the initial factory macro. Press the desired macro button if |
| you want to change the macro button you want to clear the |
| programmed functions of. |
|
|
M:ALL | Clears all programmed macros. The assigned macro to the |
| selected macro button reverts to the initial factory macro. |
|
|
RNAME | Set all the name of the control areas to the default settings. |
|
|
FCTRY | Set all settings of the remote control to the initial factory |
| settings. |
|
|
4Press and hold 9ENTER for about 3 seconds.
When the clearing is successful, “OK” appears in the display window (4).
Remote control features
Notes
•“NG” appears in the display window (4) if clearing was unsuccessful.
•“ERROR” appears in the display window (4) if you press a button not indicated in the respective step, or if you press more than one button simultaneously.
5Press GSETUP again to exit from the setup mode.
■Clearing a learned function (ERASE)
1Press GSETUP using a ballpoint pen or similar object.
“SETUP” appears in the display window (4).
2Press 9k / n repeatedly to select “ERASE” and then press 9ENTER.
The remote control enters the learning mode. “ERASE” and the name of the currently selected control area appears in the display window (4) alternately.
ERASE
DVD
3Set the operation mode selector to FSOURCE and then press an input selector button or (3).
“ERASE” and the name of the selected control area appears in the display window (4) alternately.
y
•You can also select the desired control area by pressing 5SELECT l / h repeatedly.
•If you want to erase the function learned in the AMP or TV control area, set the operation mode selector to FAMP or FTV.
4Press 9ENTER.
5Press and hold the button you want to clear for about 3 seconds.
If clearing is successful, “ERASE” and “OK” appears in the display window (4).
ERASE
OK
y
•If you continuously want to clear another function, repeat step 3.
•Once you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).
6Press GSETUP again to exit from the setup mode.
Notes
•“NG” appears in the display window (4) on the remote control if clearing was unsuccessful.
•“ERROR” appears in the display window (4) if you press more than one button simultaneously.
Operation | Advanced |
|
|