Remote control features
■Default macro functions
Pressing
macro
STANDBY
POWER
MULTI
PHONO
MD
TAPE
BD
HD DVD
DVD
CD
CBL
SAT
DTV
DVR
VCR
TUNER
DOCK
NET
USB
To automatically transmit these signals
First | Second |
STANDBY | — |
| POWER (*1) |
| TV |
| MULTI |
| |
| PHONO |
| MD |
| TAPE |
| BD |
| HD DVD |
| DVD |
| CD |
POWER |
|
| |
| CBL |
| SAT |
| DTV |
| DVR |
| VCR |
| TUNER |
| DOCK |
| NET (*2) |
| USB |
2Press 9k / n repeatedly to select “MACRO” and then press 9ENTER.
The remote control enters the
MACRO 
M:DVD
3Press the desired macro button you want to assign the macro program to and then press 9ENTER.
“M:the
4Press the buttons for the functions you want to include in the macro operation in sequence.
Example
Set the input source to DVD → Turn on the DVD player → Turn on the video monitor
Step 1 (“MCR1”): Press DVD.
Step 2 (“MCR2”): Press AV POWER.
Step 3 (“MCR3”): Press TV POWER.
POWER POWER STANDBY POWER
TV | AV |
|
| |
| 3 | 2 |
| |
MULTI | PHONO | MD | ||
TAPE | ||||
|
|
| ||
BD | DVD | CD | ||
HD DVD | ||||
| 1 |
| ||
CBL |
|
| ||
DTV | DVR | VCR | ||
SAT | ||||
|
|
| ||
TUNER | DOCK | NET |
| |
USB |
| |||
|
|
|
*1 Set the appropriate remote control code for TV in advance (see page 104).
*2 This unit plays the last received station or selected contents before the unit was set in the standby mode.
■Programming macro operations (MACRO)
You can program your own macro and use the macro programming feature to transmit several remote control commands in sequence at the press of a button. Be sure to set up remote control codes or perform learning operations before programming the macro.
Notes
•The default macro is not cleared when a new macro is programmed for a button. The default macro can be used again when the programmed macro is cleared.
•It is not possible to add a new signal (macro step) to the default macro. Programming a macro changes all macro contents.
•We do not recommend that you program continuous operations (for example, volume control) in a macro.
1Press GSETUP on the remote control using a ballpoint pen or similar object.
“SETUP” appears in the display window (4).
Indicates the number of macro
MCR 1 steps entered
M:DVD (Selected macro button)
Flashes alternately so you can set the next step
DVD (Selected control area)
Notes
•To change the selected input area, press 5SELECT l / h. Pressing the
input selector buttons or 
will program a macro step, whereas 5SELECT l / h only changes the selected input area.
•The position of the operation mode selector (AMP/TV/SOURCE) affects the assigned function. When the operation mode selector is set to FAMP or FTV, the input source selectors do not function.
5Press HMACRO to confirm the program.
You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits from the macro programming mode.
