Graphical user interface (GUI) menu
2Press 9h to access the settings window.
|
|
| PEQ Data Copy | PARAM | RESET |
|
|
|
|
| |||
|
|
|
| |||
|
|
| PEQ Select | EDIT | EXIT |
|
|
|
|
| |||
|
|
| Front L | Band/Gain |
|
|
|
|
|
|
|
| |
|
|
| Front R |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| Center |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3Press 9k / n / l / h to select “PARAM” and then press 9ENTER to select a parameter from “Band”
(band), “Freq.” (frequency) or “Q” (Q factor).
y
You can adjust “Gain” (gain) with any parameter.
4Press 9n to select “EDIT” and press 9ENTER to access the edit window.
For more information on the parametric equalizer and each parameter, see page 131.
|
| PEQ Data Copy | Band | #1 |
|
|
|
| |||
|
| ||||
|
|
| Gain | 0.0dB | |
|
| PEQ Select | Freq. | 62.5Hz | |
|
| Front L | Q | 1.000 |
|
|
|
|
|
| |
|
| Front R |
|
|
|
|
|
|
|
| |
|
| Center |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
The parameter selected in “PARAM” is highlighted.
•Press 9l / h to adjust the parameter.
•Press 9k / n to adjust the “Gain”.
•Press 9ENTER to exit the edit window.
y
•When you select “Band” in step 3, you can use this menu as a graphic equalizer.
•“Band #4”, “Band #5”, “Band #6”, and “Band #7” can adjust the frequencies above of 500 Hz.
•When you select “Subwoofer L” or “Subwoofer R” in step 1 and “Band” in step 3, you can adjust “Band #1”, “Band #2”, and “Band #3” only. In this case, “Band #1”, “Band #2”, and “Band #3” can adjust the frequencies below of 250 Hz.
5Repeat steps 3 and 4 until you are satisfied with the results.
y
If you want to reset all “Parametric EQ” parameter settings for the selected speaker, select “RESET” and press 9ENTER.
6Select “EXIT” and press 9ENTER to exit from the settings window.
■Tone Control (Tone control)
Use this feature to adjust the balance of bass and treble output to your speakers or headphones.
Note
Tone Control is not effective when:
–the Pure Direct mode (see page 61) is selected.
–one of the THX Surround mode is selected (see page 73).
–MULTI CH is selected as the input source.
Control (Tone control)
Choice | Functions |
Speaker | Adjust the bass/treble balance of your speakers. |
|
|
Headphone | Adjust the bass/treble balance of your headphones. |
|
|
y
“Speaker” and “Headphone” adjustments are stored independently. The adjustments for “Speaker” affects the front left/right, center, presence left/right speaker channels and Subwoofer channel.
Bass (Bass control)
Use this feature to adjust
Choices: 125 Hz, 350 Hz, 500 Hz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB
|
| Speaker |
| Control | Freq.: 350Hz |
| Gain: 0.0dB | |
| ||
|
| |
| Bass | +6 |
| 0 | |
| Treble | |
| ||
| ||
| Auto Bypass | |
| ||
| ||
|
|
Treble (Treble control)
Use this feature to adjust
Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz
Control range: – 6.0 dB to +6.0 dB
Initial setting: 0.0 dB
| Control | Speaker |
| ||
| Bass | Freq.: 3.5kHz |
| Gain: 0.0dB | |
| ||
| Treble | +6 |
| 0 | |
| Auto Bypass | |
| ||
| ||
|
|
Auto Bypass (Auto bypass)
Use this feature to select whether the audio output bypasses the tone control circuitry when “Treble” and “Bass” are set to 0 dB (see page 61).
Choice | Functions |
Auto | Automatically bypasses the tone control circuitry to |
| provide the purest signal possible when “Treble” and |
| “Bass” are set to 0 dB. |
|
|
Off | Does not bypass the tone control circuitry. |
|
|
■Lipsync (Audio and video synchronization)
Use this feature to adjust the audio and video synchronization.
HDMI Auto (HDMI automatic lip sync mode)
If the connected video monitor is connected to the HDMI OUT jack on this unit and compatible with the automatic audio and video synchronization function (automatic lip sync), this unit adjusts the audio and video synchronization automatically. Use this feature to activate or deactivate the automatic lip sync.
