Samsung CTI613GIN/XEE, CTI613GIN/XEO manual Service, Is it a technical fault?

Page 26

What should I do if the display is illuminated?

Check for the following:

The control panel is partially covered by a damp cloth or liquid. To reset, press the “On / Off” control sensor.

What should I do if the display is illuminated?

Check for the following:

The hob is overheated because of abnormal operation.

After hob is cooled down, press the “On / Off” control sensor for resetting.

What should I do if the display is illuminated?

Check for the following:

Cookware is unsuitable or too small or no cookware has been placed on the cooking zone

If you use suitable cookware, displayed message will automatically disapear.

If you request a service call because of an error made in operating the appliance, the visit from the customer service technician may incur a charge even during the warranty period.

Service

Before calling for assistance or service, please check the section “Troubleshooting.” If you still need help, follow the instructions below.

Is it a technical fault?

If so, please contact your customer service centre.

Always prepare in advance for the discussion. This will ease the process of diagnosing the problem and also make it easier to decide if a customer service visit is necessary.

Please take note of the following information.

What form does the problem take?

Under what circumstances does the problem occur?

When calling, please know the model and serial number of your appliance. This information is provided on the rating plate as follows:

Model description

S / N code (10 digits)

We recommend that you record the information here for easy reference.

Model:

Serial number:

When do you incur costs even during the warranty period?

if you could have remedied the problem yourself by applying one of the solutions provided in the section “Troubleshooting,”

if the customer service technician has to make several service calls because he was not provided with all of the relevant information before his visit and as a result, for example, has to make additional trips for parts. Preparing for your phone call as described above will save you the cost of these trips.

26_ warranty and service

Image 26 Contents
Induction Hob Using this manual Following symbols are used in the textChild safety Safety instructionsElectrical safety Safety during use Safety when cleaningProper disposal of your old appliance Disposal instructionsDisposing of the packaging material Contents Regulations and compliance Installing the hobSafety instructions for the installer Connecting to the mains power supply Installing into the countertop Installing the hob Control panel Parts and featuresCooking zones Components Induction heatingKey features of your appliance Other reasons why a cooking zone will switch itself off Safety shutoffResidual heat indicator Before you begin Temperature detectionInitial cleaning SuITabIlITy TesT Hob useCookware for InduCTIon CookInG zones SIze of pansEnergy saving tips Using suitable cookwareUsing the touch control sensors Switching the appliance off Switching the appliance onSelect cooking zone and heat setting Switching the child safety lock on / off SwITChInG a CookInG zone offUsInG The ChIld safeTy loCk Timer Setting the safety shutoffBridge Control Power boost controlCountdown timer Power Management Suggested settings for cooking specific foodsLight Soiling Cleaning and careHob Stubborn SoilingTo avoid damaging your appliance Problem DirtHob Frame Option Warranty and service FAQs and troubleshootingService Is it a technical fault?Cooking rings Technical dataTechnical data Code No. DG68-00198A
Related manuals
Manual 28 pages 28.86 Kb Manual 28 pages 46.09 Kb Manual 28 pages 23.78 Kb