installation
Safety instructions for the installation
This oven may be installed only by an approved electrician. The installer is responsible for connecting the appliance to the mains and in so doing for observing the relevant safety regulations.
•Ensure protection from live parts when installing the oven.
•The kitchen cabinet in which the oven is built in must satisfy stability requirements as specified in DIN 68930.
Technical specifications
Input voltage/Frequency | 230 V ~ 50 Hz |
Volume (usable capacity) | 66 ℓ |
Output rating | max. 3400 W |
Net weight | approx. 29 kg |
Weight with packaging | approx. 34 kg |
Housing (W x H x D) | 595 x 595 x 566 mm |
Oven interior (W x H x D) | 440 x 365 x 405 mm |
Power connection
| 566 |
| 560 |
595 | 572 |
|
595
21
installation
If the appliance is not connected to the mains with a plug, a
must be provided in order to satisfy safety regulations. The power cable (H05
Open the rear connection cover of the oven with a screwdriver and loosen the screws of the cable clamp before you connect the power lines to the relevant connection terminals. The oven
is earthed via the
Installation in the cabinet
This is a
•Observe minimum distances.
•Fix oven on both sides using screws
After installation, remove the vinyl protective film from the door to the appliance and the protective film from the interior surfaces of the oven.
min.550 | min. 550 |
min.600
min. 50 | min. 600 | min. 50 |
| ||
min.560 | min. 560 |
|
Air flow | Lower cabinet |
min. 550
min. 590 |
|
max. 600 | min. 50 |
|
min. 560 Upper Cabinet
Upper cabinet
installation_5