Chief Manufacturing PNR Inspect The Unit Before Installing, Specifications, Parts List

Model PNR™ Installation Instructions

Inspect The Unit Before Installing

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

1.Carefully inspect the PNR for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation until the carrier has reviewed the damage.

NOTE: Read all instructions before starting installation.

2.Lay out components to ensure you have all the required parts before proceeding. See “DIMENSIONAL DRAWING” on page 3.

SPECIFICATIONS

Table 1 provides the specificiations for the mount.

Table 1: Mount Specifications

Model	Max Support Weight	Mount
		Extended
		from Wall
PNR	200 lbs. (90.72kg)	25”*

NOTE: *Dimension does not include the PSB interface bracket.

INTERFACES

Table 2 lists the interface for the PNR.

	Table 2: PNR Interfaces
Model	Interface
PNR	14” x 14” Plasma Static Brackets (PSB)

PARTS LIST

Unpack the carton and verify the contents listed in Table

3.If you are missing any of the listed parts, contact Customer Service at: 1-800-582-6480.

Table 3: Parts List

REF	DESCRIPTION	QTY
10	PNR Wall Mount	1
20	Cover Plates	2
30	End Caps	4
40	Tiewraps	12
50	Lag Bolts, 3/8” x 2-1/2”	4
60	Flat Washers, 3/8”	4
—	Wrench, Adjustment	1
—	Bar, Adjustment	1

TOOLS REQUIRED FOR INSTALLATION

•Allen wrench set

•Drill and bit set

•Wrench set

NOTE: Other tools may be required depending on the method of installation.

4