Samsung WW90K6604SW/EE, WW80K6604SW/EE, WW90K6604QW/EE, WW80K6604QW/EE Operations, Control panel

Operations

Control panel

10

02

08

11

09

03 04 05 06 07

01	Cycle Selector		Turn the dial to select a cycle.
02	Display		The display shows current cycle information and estimated time
			remaining, or an information code when a problem occurs.
03	Temp.		Press to change the water temperature for the current cycle.
04		Rinse	Press to change the rinse count for the current cycle. You can set the
			rinse count to a max of 5, depending on the cycle.
			Press to change the spinning speed for the current cycle.
			•	Rinse Hold ( ): The final rinse process is suspended so that the
				laundry remains in the water. To unload the laundry, run a drain
				or spin process.
05		Spin	•	No Spin : The drum does not spin after the final drain process.
			•	Spin Only : To run the Spin Only cycle, press Spin for 3 seconds.
				When the cycle time and spinning speed appear, press Spin
				repeatedly until a desired spinning speed is selected. Then, press
				Start/Pause to start the cycle. The spinning time depends on the
				selected cycle.
			Press to select an option from Intensive, Pre Wash and Bubble Soak.
06		Options	Press again to deselect.
			• Availability of the options depends on the cycle.
			Press this button to activate/deactivate the Smart Control function.
07		Smart Control	When the Smart Control function is activated, you can control your
			washer using your mobile device. (For detailed information, refer to
			the “Samsung Smart Home app” section on page 37.)
			Delay End lets you set the end time of the current cycle. Based
			on your settings, the start time of the cycle will be determined
08		Delay End	by the machine’s internal logic. For example, this setting is useful
			for programming your machine to finish a wash at the time you
			normally return home from work.

•Press to choose a preset unit of hours.

Operations

English  29