Samsung WD70K5400OW/EE, WD80K5400OW/EE manual DC3, LC1

Problem		Action
	The Add Door lock/unlock is not working properly.
DC3	• Turn the machine off, and restart the cycle.
	•	If the information code remains, contact a customer service
		centre.
	Water is overflowed.
OC	•	Restart after spinning.
	•	If the information code remains on the display, contact a local
		Samsung service centre.
	Check the drain hose.
LC	• Make sure the end of the drain hose is placed on the floor.
	•	Make sure the drain hose is not clogged.
	• If the information code remains, contact a customer service
		centre.
		NOTE
LC1		When the washer displays the “LC”/“LC1” code, the washer
		do draining for 3 minutes. During this time, the Power
		button is inoperative.
	Spinning does not work.
	• Make sure laundry is spread out evenly.
UB	• Make sure the washing machine is on a flat, stable surface.
	•	Redistribute the load. If only one item of clothing needs
		washing, such as a bathrobe or pair of jeans, the final spin
		result might be unsatisfactory, and an “UB” check message
		will be shown in the display.
	Check the Motor for operation.
3C	• Try restarting the cycle.
	•	If the information code remains, contact a customer service
		centre.
	The electronic control needs to be checked (Over Voltage Error).
	• Check the PCB and wire harness.
	• Check if power is supplied properly.
	• If the information code remains, contact a customer service
UC		centre.
	Low voltage detected
	• Check if the power cord is plugged in.
	• If the information code remains, contact a customer service
		centre.
		English	57

Troubleshooting

WD80K5400OW_03744F-01_EN.indd 57

2016/11/1 9:24:48