Operations
Control panel
02 |
|
| 08 | 09 |
|
|
| ||
|
|
|
| 10 |
01 |
|
|
|
|
03 | 04 | 05 | 06 |
|
|
|
|
| 07 |
01 | Cycle Selector | Turn the dial to select a cycle. | |
|
|
| |
02 | Display | The display shows current cycle information and estimated | |
time remaining, or an information code when a problem occurs. | |||
|
| ||
|
|
| |
|
| Press to change the water temperature for the current cycle. | |
03 | Temp. | Press and hold for 3 seconds to turn on/off the Drum Light. | |
|
| The drum light turns off automatically after 2 minutes. | |
|
|
| |
04 | Rinse | Press to change the rinse count for the current cycle. You can | |
set the rinse count to a max of 5, depending on the cycle. | |||
|
| ||
|
|
| |
|
| Press to change the spinning speed for the current cycle. |
•Rinse Hold: The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.
•No Spin: The drum does not rotate after the final drain
05 Spin | process. |
•Spin Only: To run the Spin Only cycle, press 
Spin for 3 seconds. When the cycle time and spinning speed appear, press 
Spin repeatedly until a desired spinning speed is selected. Then, press 
Start/Pause to start the cycle. The spinning time depends on the selected cycle.
06 |
| Options | Press to enter the Options screen. |
|
|
|
|
|
|
| Press to turns on Smart Control. If Smart Control turns on, the |
07 |
| Smart Control | washing machine can be controlled on a mobile device. |
|
|
| Press and hold for 3 seconds to enter the Settings screen. |
|
|
|
|
08 Navigation buttons | Use to navigate through the menus or to adjust the value of the | ||
settings. | |||
|
|
|
|
09 |
| Power | Press to turn on/off the washing machine. |
| |||
| |||
Operations
English 33