Mitsubishi Electronics 838 SERIES manual Operating NetCommand-Controlled Devices

685. NetCommand IR Control (838 Series)

Operating NetCommand-Controlled Devices, continued

Key Name in	Special Operation Description and Setup	How to Use
Learning Screen
Menu	Displaying a Menu for the Current Device	Press TOOLS and number 3 to send the menu
	“Learn” the MENU key on the original remote in the	signal to the device.
	Menu learning position.
Guide	Displaying the On-Screen Program Guide	1. While watching the device, press GUIDE to
	(cable box or satellite receiver)	display the guide.
	1. “Learn” the Guide key on the original remote in	2. Press CH/PAGE to send the Page Up/Dn com-
	the Guide learning position.	mands for the guide.
	2. Learn the PAGE UP and PAGE DOWN keys of the
	original remote in the Page Up and Page
	Down learning positions.
Enter	ENTER-Key Functions (cable boxes, satellite receivers, etc.)
	Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
	SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand
	uses the same ENTER key for both operations.
	When ENTER has a menu or guide function or	1. Press MENU or GUIDE to display the device’s
	when the original remote control uses the same	menu or guide.
	key for menus and channel selection:	2. Press ENTER within the menu and
	Learn the ENTER, SELECT, or OK key in the	NetCommand will send the Enter signal for
	NetCommand Enter learning position.	menus.
Enter (digits)	When ENTER is for channel changes, i.e., the origi-	Press digit key(s) and then press ENTER.
	nal remote control has a separate ENTER key for	NetCommand will send the Enter signal for
	this function):	channel selection.
	Learn the ENTER key for channel selection in
	the NetCommand Enter (digits) learning posi-
	tion. Use this learning position only if the original
	remote control has separate keys for Enter in
	menus and Enter for channel selection.
Cancel	CANCEL as the Cancel or Exit Function	1. Press MENU or GUIDE to display the menu or
	“Learn” the Cancel or Exit function in the	guide.
	NetCommand Cancel learning position	2. Press CANCEL and NetCommand will send
		the Cancel or Exit signal.
—	The symbol “—” can serve as the separator	Press digit key(s) and press CANCEL.
(separator)	between a digital channel’s main and sub-channel	NetCommand will send the channel-separator
	digits, e.g., digital channel 12-1 (main channel is	signal.
	12, sub-channel is 1).
	“Learn” the channel separator function in the
	NetCommand – (separator) learning position.

For assistance call 1(800) 332-2119