EdgeStar AP410HS instruction

		The air intake or exhaust ports
		are partially obstructed.		Remove the obstruction.
				Vacuum the air inlet located
		The condenser coils are dirty		on the side of the unit
				Move the unit to another
The control panel lights		The unit has a minor electrical		circuit or unplug the unit and
The control panel lights		fault		plug it in again.
are blinking randomly		The unit is plugged into an		Move the unit to another
		The unit is plugged into an		Move the unit to another
		outlet that cannot supply the		circuit or unplug the unit and
		correct electricity to the unit		plug it in again.
				The drain pan has no auto
				shut-off- do not leave the unit
				unattended while draining into
				an external drain pan- the
The unit is leaking		The unit is draining into the		level of water in this drain pan
The unit is leaking		drain pan		must be manually monitored
		drain pan		must be manually monitored
		The drain stopple and plug are		Install the stopple and drain
		not installed		plug
		The unit is not on a level		Make sure the unit is on a
		surface		level surface
The heater light is				Unplug the unit, wait 30
blinking and the heater				seconds, and plug the unit
will not turn on		The unit is still set in air		back in. Then select the heater
		conditioner mode		function
The heater light is				Allow the unit to run at least 2
blinking, but the heater is		The unit is warming up before		minutes and the light will stop
working		starting full heat mode		blinking
The air conditioner is too		The unit is positioned on a
The air conditioner is too		hard, uneven floor, and is		Move the unit onto a level,
loud.		hard, uneven floor, and is		Move the unit onto a level,
loud.		vibrating.		carpeted surface.
		vibrating.		carpeted surface.
The Run LED is blinking
and the air conditioner is		The internal water reservoir is
beeping.		full.	Drain the water reservoir.
The LED display seems to				Turn the unit on with the
show that the air				Turn the unit on with the
conditioner is on, but it is		The "Timer on" feature is		power button to deactivate the
not working.		activated.		"Timer on" feature.
"E1" shows in the LED		The evaporator sensor has
display.		detected a problem.		Contact customer service.
"E2" shows in the LED		The room temperature sensor
display.		has detected a fault.		Contact customer service.
	20

AP410HS specifications

The EdgeStar AP410HS is a versatile and efficient portable air conditioner designed to provide effective cooling solutions for various spaces. With a cooling capacity of 14,000 BTU, this model is particularly well-suited for spaces up to 525 square feet, making it an excellent choice for home offices, bedrooms, or small living rooms.

One of the standout features of the AP410HS is its dual-hose design. Unlike single-hose models that can create negative pressure and draw in hot air, the dual-hose system efficiently exhausts hot air while simultaneously pulling in fresh air from outside. This results in quicker cooling times and improved energy efficiency. The unit also includes a dehumidification function, capable of removing up to 81 pints of moisture per day, which is invaluable in humid environments.

The EdgeStar AP410HS is equipped with a digital display and remote control, allowing users to easily adjust settings from across the room. The programmable timer offers flexibility, allowing you to set the unit to operate only when necessary, helping to reduce energy consumption. The air conditioner features multiple fan speeds, providing customized airflow based on user preference and environmental conditions.

In terms of installation, the EdgeStar AP410HS is designed for user-friendly setup. It comes with easy-to-follow instructions and all necessary components, including a window kit for venting the hoses. The unit is lightweight and portable, featuring sturdy caster wheels, which allow it to seamlessly move from room to room as needed.

Technologically, the unit operates quietly, avoiding the disruptive noise often associated with traditional air conditioning units. The AP410HS is also designed with an eco-friendly refrigerant, ensuring that it meets environmental guidelines while providing efficient cooling.

Additional characteristics include an air filter that is easily accessible and washable, promoting better indoor air quality. The sleek and modern design of the EdgeStar AP410HS makes it a stylish addition to any decor while maintaining its functionality and effectiveness.

In conclusion, the EdgeStar AP410HS combines powerful cooling capabilities with advanced features, making it an excellent investment for anyone seeking a reliable and efficient portable air conditioning solution.