EdgeStar AP410HS manual Thank you Energy saving tips

Page 3

Thank you

Thank you for purchasing an EdgeStar portable air conditioner. Rest assured that all EdgeStar products are designed and manufactured to the highest standards. We would like you to be able to fully utilize all features of this portable air conditioner, so please take the time to read this owner’s manual in full prior to using the unit.

Energy saving tips:

1.Use the portable air conditioner for the recommended room size. Rooms that are too small can cause the unit to short cycle and work inefficiently. Rooms that are too large will never cool completely.

2.Be careful not to obstruct the air flow coming out of the portable air conditioner. A powerful, unobstructed airflow is crucial for optimum cooling.

3.Keep blinds and curtains closed during the sunniest part of the day.

4.Clean the pre-filter often, and replace the activated carbon filter as needed (it should be replaced twice a year under normal conditions).

5.Close your fireplace damper, floor grills, and wall grills to prevent cool air from escaping.

6.Avoid opening doors frequently

7.Note that each additional person in room adds between 100-150 BTU of heat, so the more people in a room, the more cooling capacity is required

8.Set the portable air conditioner to maximum cooling and high speed airflow when you first start it up, and then adjust the unit to a comfortable setting.

Notes:

The portable air conditioner must be plugged into an appropriate power outlet. Refer to the rating label on the back of the unit for more information.

The portable air conditioner is a compressor-driven cooling system. The air conditioner has an anti-overheating safety feature that can delay the compressor from starting for three minutes after the air conditioner turns on or when a mode change is made. If the compressor does not immediately start, it is likely because of this feature. To protect the compressor from overheating or freezing, it will only operate when the ambient temperature is between 61° and 97°F.

Always unwind the power cord completely before use.

Please note that in Cooling, Heating, Auto, and Dry modes, the exhaust hose must be used.

The heating function is equipped with an auto-defrost function. When using the heating function, heating may be interrupted briefly to melt any accumulated frost. Heating will begin again once the frost is melted.

When switching into the Cooling mode or Heating mode, cooling or heating may be temporarily delayed as the unit cools down / heats up.

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page Table of contents Thank you Energy saving tips Specifications Safety precautionsPage Parts Front viewRear view Accessories Installing the exhaust hose InstallationWindow installation Wall installation permanent mounting Page Control panel LED indicatorsRemote Control Setting up the remote controlButtons Remote control functions Page Regulating airflow direction Manual drainage Drain partsDraining with the drain tray Prefilter and charcoal filter MaintenanceCleaning the exterior Cleaning the condenser coilsInstalling the charcoal filter Cleaning the prefilterLong term storage Problem Possible Causes Solutions TroubleshootingPage Description of Warranty Service Limited warrantyWhat is Covered What is not CoveredObtaining Warranty Service

AP410HS specifications

The EdgeStar AP410HS is a versatile and efficient portable air conditioner designed to provide effective cooling solutions for various spaces. With a cooling capacity of 14,000 BTU, this model is particularly well-suited for spaces up to 525 square feet, making it an excellent choice for home offices, bedrooms, or small living rooms.

One of the standout features of the AP410HS is its dual-hose design. Unlike single-hose models that can create negative pressure and draw in hot air, the dual-hose system efficiently exhausts hot air while simultaneously pulling in fresh air from outside. This results in quicker cooling times and improved energy efficiency. The unit also includes a dehumidification function, capable of removing up to 81 pints of moisture per day, which is invaluable in humid environments.

The EdgeStar AP410HS is equipped with a digital display and remote control, allowing users to easily adjust settings from across the room. The programmable timer offers flexibility, allowing you to set the unit to operate only when necessary, helping to reduce energy consumption. The air conditioner features multiple fan speeds, providing customized airflow based on user preference and environmental conditions.

In terms of installation, the EdgeStar AP410HS is designed for user-friendly setup. It comes with easy-to-follow instructions and all necessary components, including a window kit for venting the hoses. The unit is lightweight and portable, featuring sturdy caster wheels, which allow it to seamlessly move from room to room as needed.

Technologically, the unit operates quietly, avoiding the disruptive noise often associated with traditional air conditioning units. The AP410HS is also designed with an eco-friendly refrigerant, ensuring that it meets environmental guidelines while providing efficient cooling.

Additional characteristics include an air filter that is easily accessible and washable, promoting better indoor air quality. The sleek and modern design of the EdgeStar AP410HS makes it a stylish addition to any decor while maintaining its functionality and effectiveness.

In conclusion, the EdgeStar AP410HS combines powerful cooling capabilities with advanced features, making it an excellent investment for anyone seeking a reliable and efficient portable air conditioning solution.
Top Page Image Contents