Placement or Positioning, Wiring and Connections

PLACEMENT OR POSITIONING

Your new subwoofer will work well in a variety of locations. However, placement in your listening room will affect its performance. Since the wavelengths of sound reproduced by your subwoofer are large compared to its size, those sounds are omni-directional in nature. This means that locating your subwoofer in relation to your left and right main speakers will not affect the directional cues which they provide.

Because the sounds you hear are a combination of direct sound from the speaker and reflected sound from the walls, ceiling, and floor of your listening room, placement of the subwoofer in relation to room boundaries changes the balance of what you hear at low frequencies. In that low frequency range, the dimensions of most rooms are comparable to the wavelengths of those sounds. As sound propagates and reflects in the room, “standing waves” are created at frequencies where the wavelength of sound or multiples of the wavelength are equal to one of the dimensions of the room. At your listening position, these standing wave patterns of reflected sound add together in and out of phase causing large variations in the response that you hear.

As a general rule, locating your subwoofer near the corner of the room will increase its overall output, but will excite more standing waves in the room and may result in a more uneven response. Locating your subwoofer along a wall will usually mean less acoustic output but a somewhat smoother response. A middle of the room location would suggest the smoothest response with the least output capability. Of course, any location will be a compromise between acoustic performance and the aesthetic blend of the subwoofer enclosure with the decor and furnishings of your room. Don’t be afraid to experiment with the location of your subwoofer in your room for the best results at your listening position. As with any other listening test, use program material that you are familiar with that has substantial bass content.

WIRING AND CONNECTIONS

Turn off all power to your subwoofer and other equipment before making any connections.

Installation using speaker level inputs

A) For amplifiers with one set of speaker connections.

If a preamplifier output connection is not available on your amplifier or receiver, your subwoofer can be connected using your equipment’s speaker outputs. These connections are made using commonly available 18 or 16 gauge lamp cord or speaker hook-up wire. Observe correct polarity by connecting red(+) to red(+) and black(-) to black(-) for both left and right channels. Connect your amplifiers speaker output terminals to the subwoofer’s speaker level input terminals as well as to your main stereo speakers according to figure B.

Right		Left
Speaker		Speaker

- +		+ -

- R + + L -

Receiver

Power Amplifier

FIGURE B

SW1 specifications

The MTX Audio SW1 is a compact subwoofer that packs a punch, designed for car audio enthusiasts seeking powerful bass performance in a streamlined package. With its impressive specifications and innovative technologies, the SW1 is an excellent choice for those looking to enhance their driving experience with high-quality sound.

One of the standout features of the MTX Audio SW1 is its enclosure design. The subwoofer is housed in a sturdy, custom-designed enclosure that not only enhances its acoustic performance but also ensures durability. The SW1 is engineered for efficiency, delivering rich, deep bass without sacrificing space in your vehicle.

At the heart of the SW1 is its advanced driver technology. The subwoofer features a specialized cone that allows for increased excursion while maintaining linearity, which translates to clearer sound and reduced distortion. The cone is made from high-quality materials that enhance rigidity and responsiveness, ensuring that the low frequencies are reproduced accurately and with power.

The MTX Audio SW1 also incorporates a powerful built-in amplifier, which is optimized to drive the subwoofer to its maximum potential. The amplifier is equipped with features such as adjustable gain and a low-pass filter, allowing users to customize their audio experience according to their preferences. This versatility is essential for achieving the perfect balance between bass and the rest of the audio spectrum.

Installation is made simple with the SW1, thanks to its compact size and straightforward wiring options. The subwoofer can fit comfortably in various vehicle models, making it an ideal solution for those who have limited space but still want to enjoy the benefits of a high-performance audio system.

In addition to its performance capabilities, the MTX Audio SW1 is built to last. It features high-quality materials and components that are resistant to wear and tear, ensuring longevity even under heavy use.

Overall, the MTX Audio SW1 subwoofer stands out in the car audio market for its combination of power, efficiency, and user-friendly design. Whether you’re a casual listener or a dedicated audiophile, the SW1 offers an excellent way to elevate your car's audio system and enjoy a more immersive listening experience while on the road.