MTX Audio SW1 owner manual Operation, Care and Cleaning, Powered Home Subwoofer

Page 5

OPERATION

After you have connected your subwoofer, adjusted it for proper operation with the rest of your system, and experimented to find the best location for it, it’s time to sit back and enjoy it. As you do, here are some hints for getting the most out of your subwoofer.

A)The subwoofer’s level control is designed to adjust the balance between your subwoofer and main stereo speakers and should not be used as a substitute for the bass or loudness controls on your amplifier or receiver. If more bass is desired, advance the bass or loudness controls on your main amplifier or receiver.

B)Your subwoofer’s auto turn-on-turn-off feature allows “set it and forget it” operation by keeping the electronics in a standby mode until a signal is detected, which turns the amplifier on instantly. When there is no signal present after a few minutes, the electronics will again shut down to the standby mode. We do suggest that you turn the subwoofer off by its power switch if it is to be unused for an extended period of time. For additional protection against damage from lightning, we recommend unplugging the line cord.

C)The tone controls on your preamplifier, receiver, or amplifier should be

used with caution and care. Excessive boost in certain frequency ranges can cause heavy demands on amplifier and loudspeaker components resulting in overheating, distortion, mechanical overload, and premature failure.

CARE AND CLEANING

Your subwoofer is finished in a durable vinyl and may be wiped clean with a damp cloth as needed when the power switch is turned off.

POWERED HOME SUBWOOFER

OWNER’S MANUAL

Table of Contents

 

Introduction

2

Unpacking/pre-installation instructions

3

Glossary

3

Explanation of features and controls

4

Placement or positioning

6

Wiring and connections

7

Set-up and adjustment

11

Operation

12

Care and cleaning

12

In case of trouble

13

Specifications

14

12

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SW1 Technical Assistance TWO Year Limited Warranty Care and MaintenanceSafety Symbols and Statements SpecificationOpened Important Safety Instructions Case of TroubleOperation Care and CleaningPowered Home Subwoofer Introduction SET-UP and AdjustmentCongratulations Glossary UNPACKING/PRE-INSTALLATION InstructionRefer to figure a Explanation of Features and ControlsUsing a preamp or receiver with line level outputs For amplifiers with two sets of speaker connections Figure CFor amplifiers with one set of speaker connections Placement or PositioningWiring and Connections

SW1 specifications

The MTX Audio SW1 is a compact subwoofer that packs a punch, designed for car audio enthusiasts seeking powerful bass performance in a streamlined package. With its impressive specifications and innovative technologies, the SW1 is an excellent choice for those looking to enhance their driving experience with high-quality sound.

One of the standout features of the MTX Audio SW1 is its enclosure design. The subwoofer is housed in a sturdy, custom-designed enclosure that not only enhances its acoustic performance but also ensures durability. The SW1 is engineered for efficiency, delivering rich, deep bass without sacrificing space in your vehicle.

At the heart of the SW1 is its advanced driver technology. The subwoofer features a specialized cone that allows for increased excursion while maintaining linearity, which translates to clearer sound and reduced distortion. The cone is made from high-quality materials that enhance rigidity and responsiveness, ensuring that the low frequencies are reproduced accurately and with power.

The MTX Audio SW1 also incorporates a powerful built-in amplifier, which is optimized to drive the subwoofer to its maximum potential. The amplifier is equipped with features such as adjustable gain and a low-pass filter, allowing users to customize their audio experience according to their preferences. This versatility is essential for achieving the perfect balance between bass and the rest of the audio spectrum.

Installation is made simple with the SW1, thanks to its compact size and straightforward wiring options. The subwoofer can fit comfortably in various vehicle models, making it an ideal solution for those who have limited space but still want to enjoy the benefits of a high-performance audio system.

In addition to its performance capabilities, the MTX Audio SW1 is built to last. It features high-quality materials and components that are resistant to wear and tear, ensuring longevity even under heavy use.

Overall, the MTX Audio SW1 subwoofer stands out in the car audio market for its combination of power, efficiency, and user-friendly design. Whether you’re a casual listener or a dedicated audiophile, the SW1 offers an excellent way to elevate your car's audio system and enjoy a more immersive listening experience while on the road.
Top Page Image Contents