Oreck XL2400RS warranty How to Replace a Worn Belt To Adjust or Replace Brush

Page 6

How to Replace a Worn Belt

WARNING: Unplug cord from electrical outlet before servicing.

To Adjust or Replace Brush

WARNING: Unplug cord from electrical outlet before servicing.

Remove the replacement belt from the storage channel.

Remove the door by removing the hold down screw located on side of power head.

Slide the door forward by prying open with a screwdriver or coin.

Remove the belt from the brush roll pulley and the motor drive shaft.

Loop the new belt over the motor drive shaft. Place the opposite end of the belt on the brush roll pulley.

Rotate and match

bearing assemblies

To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond baseplate, brush should be adjusted.

Remove the baseplate by removing 5 screws. Then, remove the belt and brush roll from the housing.

Rotate both bearing assem- blies at ends of brush roll to show “old” and replace in the holding channels in the housing.

NOTE: The bearing assembly setting marked “OLD” has a smooth side. The one marked “NEW” has a notch. When rotating bearings, make sure both bearing assembly settings are the same and face up when replacing the brush roll.

Reassemble the belt and the baseplate and check bristle height above baseplate at each end of brush.

Rotate the brush roll three

(3) complete revolutions to ensure that no part of the belt is overhanging the end of the motor drive shaft.

Replace the door by sliding it into the groove at the bottom of the housing. Replace the hold down screw.

IMPORTANT: Unless the brush is worn as indicated above, both bearings must be in the “new” position. When rotating, both bearings must be in the “old” position. Unmatched settings will cause damage to your machine.

If a previous adjustment has already been made and bristle height does not extend above baseplate, a new brush assembly should be ordered.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents XL2400RS Safety Instructions Table of ContentsUSA Canada Warranty AssemblyMaintenance Customer Service Part NumberFor Easy Power Cord Storage To Replace Filter Dust BagUp-Position Lock Operating Instructions How to Replace a Worn Belt To Adjust or Replace Brush Stuffing or Blockage RingTroubleshooting Guide Save Service CALLS...CHECK These First

XL2400RS specifications

The Oreck XL2400RS is a high-performance vacuum cleaner designed to make home cleaning efficient and effortless. With its lightweight design, weighing just under eight pounds, this vacuum offers unparalleled ease of use. The sleek and compact structure enables users to navigate through tight spaces, making it ideal for both large and small homes.

One of the standout features of the Oreck XL2400RS is its powerful motor, which generates an impressive suction power that effectively captures dirt, dust, and allergens from various surfaces. Its unique function can remove particles as small as 0.3 microns, ensuring a cleaner environment for your home. This results in improved indoor air quality, essential for allergy sufferers and those with respiratory issues.

The vacuum is equipped with a top-fill design that maximizes the usage of the bag. Unlike traditional vacuum cleaners that can lose suction as the bag fills up, the Oreck XL2400RS maintains consistent performance throughout usage. This feature means homeowners don’t have to frequently replace bags, leading to cost savings and convenience.

Another notable technology in this model is the proprietary Oreck Halo Technology, which incorporates a special roller brush designed for deep cleaning carpets and other surfaces. The roller brush moves in a unique way to agitate carpet fibers effectively, lifting embedded dirt and debris for thorough cleaning. Additionally, the vacuum’s edge cleaning feature allows users to clean corners and along walls effortlessly, enhancing its versatility.

The Oreck XL2400RS also incorporates a variety of useful accessories. The included dusting brush, crevice tool, and upholstery tool enable cleaning of intricate spaces and delicate fabrics. This multifunctionality provides users with all the necessary tools to tackle different cleaning tasks around the home.

User-friendliness is another hallmark of the Oreck XL2400RS. It features a simple, straightforward design with easy-to-use controls, making it accessible for people of all ages. Moreover, its low-profile design allows it to glide under furniture with ease, ensuring no space is left uncleaned.

Overall, the Oreck XL2400RS stands out as a reliable and efficient vacuum cleaner that combines lightweight design with powerful suction and versatile cleaning capabilities. It’s a perfect choice for anyone looking to maintain a clean and healthy living environment with minimal effort.
Top Page Image Contents