Oreck XL2400RS warranty Operating Instructions

Page 5

Operating Instructions

To Operate

Make sure disposable paper filter dust bag is in place. DO NOT operate the cleaner without a paper filter dust bag. Plug the power cord into an electrical outlet and press the On (l) - OFF (O) switch on top of base when ready to operate.

General Information

The performance of your new cleaner greatly depends upon care and maintenance. The instructions in this manual will guide you in performing basic care and maintenance. To obtain the most satisfying years of service read the instructions and keep them handy for future reference.

Operating Recommendations

This new ORECK XL High-Speed Upright is one of the finest, fastest, and strongest units in its class. You’ll love the way it cleans, gets under things, and it’s SO lightweight and easy to use.

The following are a few simple suggestions regarding its operation:

1.When inserting a new disposable paper filter dust bag— FIRST PUFF OUT and OPEN THE BAG.

2.When the disposable filter dust bag is full, REPLACE IT.

3.If at any time the machine does not pick up properly or makes an unusual noise, STOP OPERATION and service.

4.Although your upright will pick up pins, paper clips, and other small objects, it is recommended that these be removed from the floor before you vacuum. Failure to do so may result in permanent damage to the motor suction fan and its housing.

5.WARNING: Do not use your vacuum cleaner on damp or wet surfaces. This will cause damage to the vacuum cleaner and is dangerous to the user. Damage caused by use on wet or damp surfaces is not covered under warranty.

6.REPLACE THE BELT EVERY 6 MONTHS.

7.Change the disposable filter dust bag at least once a month—even if it is not full! The collected dust in the dust

bag can cause odor, attract moisture, act as a breeding area andruncantheaffectvacuumthe efficiecleanercy overf thecordcleaner. The.

8.revolvingDO NOT brush could damage the cord.

9.Use caution when vacuuming over area rug edges and fringe.

Disposable Paper Filter Dust Bags

Disposable paper filter dust bags play a very important role in the efficiency of your ORECK vacuum cleaner. The purpose of the paper bag is to trap dirt, but at the same time it must be porous enough to allow air to pass through. If the paper bag becomes clogged, no air can pass through the cleaner and cleaning cannot take place, regardless of the cleaner’s power.

To keep your cleaner operating at maximum efficiency, change the dust bag frequently. DO NOT FILL ABOVE THE LINE INDICATED ON THE DUST BAG.

Be sure the disposable paper filter dust bag is installed properly.

All paper dust bags are not the same. Your ORECK disposable dust bags have been designed to be used with the ORECK cleaner. Using bags other than genuine ORECK Type CC disposable bags will affect the cleaning ability of your cleaner and could cause damage to it.

The Belt

The belt on your vacuum cleaner controls the speed of the revolving brush and is very important for the effective operation of the cleaner. If the belt becomes stretched or cut, it will cause the revolving brush to stop completely or slow down. See instructions in the manual for replacing belt.

An extra belt is stored in the baseplate of your cleaner. When buying replacement belts, use ONLY ORECK genuine belts. Belts other than ORECK belts will not operate the revolving brush correctly and may create undue stress which will cause damage to the motor and brush bearings. Using belts other than ORECK belts will void the warranty.

Lubrication

The vacuum cleaner motor bearings are factory lubricated and seated. Further lubrication is not required.

General Cleaner Care

At least once a month, check for and remove excessive

lint, string or hair from

revolving brush.

Wipe the inside and outside

of the outer vinyl bag and

the outside of the cleaner

with a damp cloth. Also

clean the connector deflector

assembly area, base of cleaner and fan housing area. Vacuum or shake dust out of the inner bag.

A little preventative maintenance will keep your cleaner looking new and will ensure continued cleaning effec- tiveness.

CAUTION—WOOD FLOORS, SOFT (VINYL, ASPHALT TILE, ETC.) FLOOR SURFACES AND POLISHED FLOOR FINISHES Use floor and floor finish manufacturer’s recommended methods of cleaning. The metal strip on the base of the cleaner could be damaged if used on concrete or abrasive surfaces, and, therefore, cause damage to wood floors, soft (vinyl, asphalt tile, etc.) floor surfaces and polished floor finishes. The roller brush may also scuff very soft finishes. Do not operate the unit while in the upright and locked position. Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

5

Image 5
Contents XL2400RS Table of Contents Safety InstructionsMaintenance Customer Service Warranty AssemblyUSA Canada Part NumberUp-Position Lock For Easy Power Cord StorageTo Replace Filter Dust Bag Operating Instructions How to Replace a Worn Belt To Adjust or Replace Brush Ring Stuffing or BlockageSave Service CALLS...CHECK These First Troubleshooting Guide

XL2400RS specifications

The Oreck XL2400RS is a high-performance vacuum cleaner designed to make home cleaning efficient and effortless. With its lightweight design, weighing just under eight pounds, this vacuum offers unparalleled ease of use. The sleek and compact structure enables users to navigate through tight spaces, making it ideal for both large and small homes.

One of the standout features of the Oreck XL2400RS is its powerful motor, which generates an impressive suction power that effectively captures dirt, dust, and allergens from various surfaces. Its unique function can remove particles as small as 0.3 microns, ensuring a cleaner environment for your home. This results in improved indoor air quality, essential for allergy sufferers and those with respiratory issues.

The vacuum is equipped with a top-fill design that maximizes the usage of the bag. Unlike traditional vacuum cleaners that can lose suction as the bag fills up, the Oreck XL2400RS maintains consistent performance throughout usage. This feature means homeowners don’t have to frequently replace bags, leading to cost savings and convenience.

Another notable technology in this model is the proprietary Oreck Halo Technology, which incorporates a special roller brush designed for deep cleaning carpets and other surfaces. The roller brush moves in a unique way to agitate carpet fibers effectively, lifting embedded dirt and debris for thorough cleaning. Additionally, the vacuum’s edge cleaning feature allows users to clean corners and along walls effortlessly, enhancing its versatility.

The Oreck XL2400RS also incorporates a variety of useful accessories. The included dusting brush, crevice tool, and upholstery tool enable cleaning of intricate spaces and delicate fabrics. This multifunctionality provides users with all the necessary tools to tackle different cleaning tasks around the home.

User-friendliness is another hallmark of the Oreck XL2400RS. It features a simple, straightforward design with easy-to-use controls, making it accessible for people of all ages. Moreover, its low-profile design allows it to glide under furniture with ease, ensuring no space is left uncleaned.

Overall, the Oreck XL2400RS stands out as a reliable and efficient vacuum cleaner that combines lightweight design with powerful suction and versatile cleaning capabilities. It’s a perfect choice for anyone looking to maintain a clean and healthy living environment with minimal effort.