Oreck USER'S GUIDE How to fit the Towel Over the Rectangular Brush, Maximum cleaning power

Floor/Carpet

hold the brush with the bristles down. With the angle adapter pointing downward, insert it into the hole in the the back of the brush, then turn the Angle Adapter 180°.

maximum cleaning power.

Step 2: The Angle Adapter is usually already attached to the Rectangular Floor/Carpet Brush. Fit Floor Brush with the Angle Adapter onto the Extension Tube. If the angle adapter is not

attached to the Brush,

Step 3: Insert the electrical power cord into the wall outlet. Press the On/Off Power Switch position, the Red Power On Light will illuminate and wait for the Vapor Cleaner to reach its working temperature. The Vapor Ready Light will illuminate when the Vapor Cleaner has reached

How to fit the Towel Over the Rectangular Brush

The Oreck 100% White Terry Cloth Towel can be fitted on this brush so as to absorb the dirt and protect delicate surfaces. It can also be used on vertical washable surfaces following the same procedure as for the floor.

Step 1: Prepare White Terry Cloth Towel. Place the brush on top of the towel.

Step 2: Fold the towel as shown.

7