Oreck U2420RSQ warranty How to Replace a Worn Belt To Adjust or Replace Brush

Page 6

How to Replace a Worn Belt

WARNING: Unplug cord from electrical outlet before servicing.

To Adjust or Replace Brush

WARNING: Unplug cord from electrical outlet before servicing.

Remove the replacement belt from the storage channel.

Remove the door by removing the hold down screw located on side of power head.

Slide the door forward by prying open with a screwdriver or coin.

Remove the belt from the brush roll pulley and the motor drive shaft.

Loop the new belt over the motor drive shaft. Place the opposite end of the belt on the brush roll pulley.

Rotate and match

bearing assemblies

To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond baseplate, brush should be adjusted.

Remove the baseplate by removing 5 screws. Then, remove the belt and brush roll from the housing.

Rotate both bearing assem- blies at ends of brush roll to show “old” and replace in the holding channels in the housing.

NOTE: The bearing assembly setting marked “OLD” has a smooth side. The one marked “NEW” has a notch. When rotating bearings, make sure both bearing assembly settings are the same and face up when replacing the brush roll.

Reassemble the belt and the baseplate and check bristle height above baseplate at each end of brush.

Rotate the brush roll three

(3) complete revolutions to ensure that no part of the belt is overhanging the end of the motor drive shaft.

Replace the door by sliding it into the groove at the bottom of the housing. Replace the hold down screw.

IMPORTANT: Unless the brush is worn as indicated above, both bearings must be in the “NEW” position. When rotating, both bearings must be in the “OLD” position. Unmatched settings will cause damage to your machine.

If a previous adjustment has already been made and bristle height does not extend above baseplate, a new brush assembly should be ordered.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents U2420RSQ A Z I N GSafety Instructions Table of ContentsAccessories Sold Separately Warranty AssemblyMaintenance Customer Service USA CanadaGeneral Information To Replace Filter Dust BagOperating Instructions To OperateHow to Replace a Worn Belt To Adjust or Replace Brush Stuffing or Blockage RingTroubleshooting Guide Call Customer Service HOT Line

U2420RSQ specifications

The Oreck U2420RSQ is a highly regarded upright vacuum cleaner designed to deliver exceptional cleaning performance while remaining lightweight and easy to handle. With its innovative features and advanced technology, the Oreck U2420RSQ stands out as a reliable choice for both residential and commercial cleaning needs.

One of the main features of the Oreck U2420RSQ is its ultra-lightweight design, which weighs just under eight pounds. This makes it easy for users to maneuver around furniture and carry up and down stairs without much effort. Its compact design ensures that it occupies minimal storage space while still delivering robust cleaning capabilities.

The Oreck U2420RSQ features a powerful 102 mph top airflow and a high-speed roller brush that agitates and lifts dirt from carpets and hard floors effectively. The vacuum's unique floor selector allows users to switch between carpet and hard floor settings seamlessly, ensuring optimal performance on various surfaces. Additionally, the vacuum's 12-inch cleaning path enables quick and efficient cleaning of larger areas without needing to make multiple passes.

Another significant innovation in the Oreck U2420RSQ is its multi-stage filtration system. The vacuum is equipped with an inner bag that captures 99% of dust and allergens as small as 0.3 microns. This makes it an excellent choice for allergy sufferers, as it helps improve indoor air quality by trapping particles that would otherwise be released back into the environment during vacuuming.

The Oreck U2420RSQ is also designed with user convenience in mind. It features a simple, intuitive control system that allows users to adjust the height and cleaning mode effortlessly. The vacuum's low-profile design allows it to reach under furniture and tight spaces, ensuring that no dust or debris is left behind. Furthermore, the vacuum includes onboard tools, such as a crevice tool and dusting brush, that make it easy to tackle above-floor cleaning tasks.

Overall, the Oreck U2420RSQ combines lightweight portability, powerful suction, and advanced filtration technology to provide effective cleaning performance. Its thoughtful features make it suitable for various cleaning needs, making it a popular choice among consumers seeking reliability and efficiency in their vacuuming solutions. Whether cleaning homes or office spaces, the Oreck U2420RSQ is designed to deliver exceptional results with every use.
Top Page Image Contents