EdgeStar AP10000HW owner manual Safety Instructions, Electrical Safety

Page 2

Safety Instructions

Improper handling can cause serious damage to the appliance and/or to the user.

This portable air conditioner is not intended for use by children. Children should be supervised to ensure that they do not play with this product.

Electrical Safety

1.This unit is designed for indoor use only.

2.Do not use the unit in extremely humid or wet environments.

3.Do not wet the housing or control panel.

4.Do not pull the unit by the cord.

5.Always turn the unit off and unplug it from the socket when cleaning.

6.Unplug the unit if it is not going to be used for a long period of time.

7.Do not operate the unit with a damaged plug or a loose socket.

8.Use only the correct power supply with appropriate amperage.

9.If the power cord is damaged, it must be replaced by the manufacturer, a service agent, or qualified technician.

10.Do not remove any part of the casing unless instructed by an authorized technician

General Safety

1.This portable air conditioner is not intended to be used by children.

2.Do not allow children to play with the controls or drop any objects into the air outlets or vents.

3.Do not place objects or let any person sit on top of the unit.

4.Only use in the upright position on a flat, level surface and provide at least 20 inches of clearance from any walls or objects.

5.Route the power cord carefully to avoid a tripping hazard.

6.This unit is intended for domestic use only. Do not use the portable air conditioner for industrial or commercial use. Any other use may invalidate the warranty

Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) safety plug. This device provides protection to reduce the risk of fire due to arcing faults in the power supply cord. Before using your portable air conditioner, follow the instructions below to ensure that the LCDI plug is working properly:

1.Plug the power cord to a grounded outlet.

2.Press the TEST button on the LCDI plug. This should cut the power to the air conditioner.

3.Press the RESET button to start using your air conditioner.

If the indicator light remains lit after pressing the TEST button, please contact EdgeStar support.

DO NOT USE YOUR PORTABLE AIR CONDITIONER IF THE TEST FAILS.

Do not use the TEST and RESET buttons as an ON/OFF switch.

2

Image 2
Contents AP10000HW Portable Air Conditioner Safety Instructions Electrical SafetyTable of Contents Page Introduction For Your RecordsParts Identification BackInstallation Activated Carbon Filter Instructions to install the carbon filterInstallation Exhaust Hose Window kitInstallation Exhaust Hose Operation Using the Control Panel 10 8Setting the Temperature Heating functionRegulating air flow direction Operation Using the Remote ControlOperation Adjusting the Louvers Maintenance Water Drainage Repeat until the unit is emptiedMaintenance Extending the Drain Tube Maintenance Cleaning the Unit Preparation for StorageOptimizing Performance For Maximum Performance and EfficiencyTroubleshooting My air conditioner is not functioning at allSpecifications EdgeStar Limited Warranty What is CoveredPage EdgeStar Products Box Austin, TX Toll Free

AP10000HW specifications

The EdgeStar AP10000HW is a portable air conditioner designed to provide effective cooling in smaller spaces, such as bedrooms, offices, and dorm rooms. Boasting a compact design and a range of appealing features, the AP10000HW has become a popular choice for those seeking an efficient solution to beat the heat without the need for extensive installation or permanent modifications.

One of the standout features of the EdgeStar AP10000HW is its cooling capacity. With a powerful output of 10,000 BTUs, this air conditioner can cool areas up to approximately 350 square feet, making it ideal for a variety of settings. The unit operates as a 3-in-1 appliance, offering not only air conditioning but also dehumidification and fan modes. This versatility allows users to customize their comfort according to their specific needs throughout the warm months.

The EdgeStar AP10000HW employs advanced technology to improve efficiency and user experience. For instance, it features a digital thermostat and a remote control, allowing users to adjust temperature settings and mode preferences from across the room. Additionally, its programmable timer helps users save energy by scheduling the unit to turn on or off at specific times, ensuring that space is cooled only when needed.

Energy efficiency is another significant characteristic of the AP10000HW. It has a relatively high Energy Efficiency Ratio (EER), which means it provides considerable cooling output while consuming less energy compared to less efficient units. This not only helps in reducing electricity bills but also minimizes environmental impact.

The design of the EdgeStar AP10000HW emphasizes portability and convenience. It comes equipped with caster wheels and side handles, enabling users to easily move it from room to room. Furthermore, installation is straightforward, involving a simple window kit that fits most standard window sizes without requiring professional help.

To maintain optimal performance, the unit comes with a washable pre-filter that traps dust and allergens, improving air quality for the user. This feature, combined with a built-in dehumidifier that can remove up to 70 pints of moisture per day, makes the EdgeStar AP10000HW an excellent choice for locations with high humidity levels.

In summary, the EdgeStar AP10000HW portable air conditioner blends power, efficiency, and versatility into one compact package. Its easy-to-use features, energy-saving technologies, and portability make it a practical solution for anyone in search of reliable cooling comfort. Whether you're battling the summer heat at home or in the office, the EdgeStar AP10000HW promises to deliver satisfaction and comfort every time.