Setting
the Shadow
You can set the lyrics to be displayed in the black strips.
1 Load a
2 Press MENU
Listening
to Radio
You can listen to the chosen band (FM, AM) by using either the automatic or manual tuning operation.
Remote Control Unit
discs.
button.
1 Press TUNER/
BAND button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
2 Tune in to the desired station.
Automatic Tuning 1 Presspreset station. button to select the
Automatic Tuning 2 Press and hold 
button to automatically search the band.
Manual Tuning Briefly press 
button to increase or decrease the frequency incrementally.
3 Press Cursor 
,
button to move to ‘Shadow’.
Press ENTER
4 button to select the desired item.
•Each time the button is pressed, the selection changes as follows:
ON ➝ OFF.
Main Unit
Press the TUNER
1 button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
) button
to select PRESET and then
press 
button or turn Multi Jog Knob to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button to
select "AUTO" and then press
and hold 
button or turn
Manual Tuning Press STOP (
) to select MANUAL and then briefly
press 
or turn Multi Jog Knob to tune in to a lower or higher frequency.
RADIO OPERATION
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
57 | • Each time the button is pressed, the sound switches between "STEREO" and "MONO". | 58 | |
• In a poor reception area, select MONO for a clear, | |||
|
|