
Recording a Radio Program | Timer Function |
| • The timer enables you to switch the system on or off at specific times. |
You can record a radio program of your choice. | • If you no longer want the system to be switched on or off automatically, you must cancel the timer. |
You do not need to adjust the volume, as it has no effect on the recording. | • Before setting the timer, check that the current time is correct. |
| • For each step, you have a few seconds to set the required options. |
| If you exceed this time, you must start again. |
Example: You wish to wake up to music every morning.
Switch the system |
| Press TIMER/ CLOCK |
on by pressing |
| until TIMER is |
1STANDBY/ON. |
| 2 displayed. |
|
|
|
3 Press the ENTER button.
•ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any
Switch the system
1 on by pressing
STANDBY/ON.
Select the radio
4 station that you wish to record by pressing
![]()
/DOWN or UP/![]()
![]()
button .
Insert a blank
2 cassette in TAPE 2.
5 Press(REC/PAUSE)
button.
•REC is displayed in red and recording starts.
Select the
3 TUNER function
by pressing
TUNER/BAND.
6 To stop recording, press
button.
4 Set the timer switch-on time.
a. Set the hour by pressing ![]()
or ![]()
button.
b. Press ENTER .
•The minutes flash.
c.Set the minutes by pressing ![]()
or
![]()
button.
d.Press ENTER.
•OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch- off time already set; you can now set the timer
Press ![]()
or ![]()
button
7to select the source to be played when the system switches on.
•TAPE (cassette) : Insert a cassette tape.
•TUNER (radio) : a Press ENTER. b Select a preset
station by pressing
![]()
or ![]()
.
•
5 Set the timer switch-off time.
a. Set the hour by pressing ![]()
or ![]()
button.
b. Press ENTER.
•The minutes flash.
c.Set the minutes by pressing ![]()
or
![]()
button.
d.Press ENTER.
•VOL 10 is displayed, where 10 corresponds to the volume already set.
8 Press ENTER to confirm the timer.
Press ![]()
or ![]()
6 button to adjust the
volume level and press ENTER.
•The source to be selected is displayed.
Press STANDBY/ON
9 to set the system to standby mode.
•
is displayed to the top right of the time, indicating that the timer has been set.
•The system will switch on and off automatically at the required times.
MISCELLANEOUS
65
Note | • If the timer switch on and off times are identical, the word ERROR is displayed. |
| ||
| • You can also use | , | button on the remote control to instead Multi Jog or | button |
in step 4,5,6,7. | 66 |
|