Samsung SBB-MT12EA/EN manual PIP On/Off control, Safety Lock

PIP On/Off control

•• Function

The PIP mode of a product can be turned on or off using a PC. ――Only available on models that have the PIP function.

――The mode cannot be controlled if Video Wall is set to On. ――This function is not available in MagicInfo.

•• Viewing PIP on/off state (Get the PIP ON / OFF Status)

Header	Command	ID	Data length	Checksum
0xAA	0x3C		0

•• Setting PIP on/off (Set the PIP ON / OFF)

Header	Command	ID	Data length	Data	Checksum
0xAA	0x3C		1	"PIP"

"PIP": A code used to turn the PIP mode of a product on or off

1:PIP ON

0:PIP OFF

•• Ack

Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x3C	"PIP"
"PIP": A code used to turn the PIP mode of a product on or off
•• Nak
Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x3C	"PIP"

"ERR": A code showing what error has occurred

Safety Lock

•• Function

PC can be used to turn the Safety Lock function on or off on a product.

This control is available regardless of whether or not the power is turned on.

•• Viewing the safety lock state (Get Safety Lock Status)

Header	Command	ID	Data length	Checksum
0xAA	0x5D		0

•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)

Header	Command	ID	Data length	Data	Checksum
0xAA	0x5D		1	"Safety
				Lock"

"Safety Lock": Safety lock code to be set on a product

1:ON

0:OFF

•• Ack

Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'A'	0x5D	"Safety Lock"
"Safety Lock": Safety lock code to be set on a product
•• Nak
Header	Command	ID	Data	Ack/Nak	r-CMD	Val1	Checksum
			length
0xAA	0xFF		3	'N'	0x5D	"ERR"

"ERR": A code showing what error has occurred

20